Sikaflex-252 structural adhesive
At a glance
- 1K PU construction adhesive
- High dynamic load capacity
- For vehicle assembly
Sikaflex-252 is an elastic, one-component polyurethane (PU) structural adhesive for bonding large assembly components subject to dynamic loads. It cures on exposure to atmospheric moisture and has good non-sag properties.
Its elasticity allows Sikaflex-252 to absorb high dynamic stresses while dampening vibrations. This structural adhesive provides excellent gap-filling properties and adheres to a wide range of substrates, including wood, metals, aluminium, coated steel, ceramics and various plastics.
Sikaflex-252 is suitable for vehicle manufacturing, bodywork construction and general assembly where a strong, flexible bond is required.
Benefits of Sikaflex-252
- Elastic structural adhesive for dynamically loaded joints.
- High resistance to dynamic stresses.
- Excellent adhesion to a wide variety of substrates.
- Good gap-filling properties.
- Dampens vibrations.
- Can be painted.
- Electrically non-conductive.
- Suitable for bonding large assembly components.
Applications
Sikaflex-252 can bond assembly components exposed to dynamic loads, including:
- Wood.
- Aluminium and other metals.
- Coated and galvanised steel.
- Anodised aluminium.
- Metal primers and two-component paint coatings.
- Glass-fibre reinforced plastics (GRP/FRP).
- Ceramic materials.
- Various plastics.
Surfaces must be clean, dry and free of grease, oil, dust and other contaminants. Specific surface preparation may be required, depending on the material, to achieve a durable bond.
Specifications
Packaging: 300 ml cartridge
Colour: black or white
Chemical base: one-component polyurethane
Curing mechanism: moisture curing
Non-sag properties: good
Application temperature: 10–35°C
Skin formation time: approximately 40 minutes
Working time: approximately 35 minutes
Hardness: Shore A 50
Tensile strength: 3 MPa
Elongation at break: 400%
Shear stress: 2.5 MPa
Temperature resistance: −40 to 90°C
Shelf life: 12 months when stored below 25°C
Application gun: cartridge caulking gun
Product properties
The key technical properties clearly listed in one place.
- Article number
- LIJ001214
- Colour
- Zwart, White
-
Open time is the period during which an applied adhesive, sealant or mortar can still be assembled, positioned or adjusted. It is usually given in minutes under specified conditions, often around 20 or 23 °C. Open time generally starts at application and may differ from the working time after mixing.
- 10 tot 30 minuten
-
Adhesive type describes the family of adhesive or sealant, such as epoxy adhesive, (methyl)methacrylate adhesive, polyurethane adhesive or polymer sealant. Its chemistry affects processing, curing, flexibility and adhesion. Products of the same type may still differ, so check the suitable substrates and application instructions.
- Polyurethaanlijm
-
This property lists the substrates on which an adhesive, resin or coating can achieve strong adhesion according to the product information. The result also depends on surface preparation.
- Cleaning and degreasing: removes dirt, oil and other substances that interfere with bonding.
- Sanding or roughening: can improve adhesion when suitable for the substrate.
- Primer: required or recommended for some surfaces.
Materials such as PE, PP and PTFE are difficult to bond with many conventional adhesives and may need a specialist adhesive or pretreatment. If in doubt, test adhesion on a small area.
- Hout, Aluminium, Staal, Keramiek
-
The recommended application temperature range indicates the conditions under which the product can generally be applied and cured properly. Three temperatures matter:
- Air: the temperature in the workshop or outdoors.
- Substrate: the temperature of the surface being treated.
- Product: the temperature of the resin, adhesive or coating itself.
A cold substrate can cause condensation and affect adhesion. At higher temperatures, two-component products may react faster, reducing their working time. Check the dew point and follow the product instructions.
- 10-35 °C
-
The chemical base describes the chemistry of an adhesive, sealant, resin or coating, such as epoxy, polyester, polyurethane, (methyl)methacrylate or a hybrid polymer. It affects curing, flexibility and adhesion. Products with the same chemical base are not necessarily suitable for the same applications.
- One-component polyurethane (PU)
-
Hardness describes a material's resistance to indentation. For silicone rubber and other elastomers, the Shore A scale is commonly used: Shore A 15, for example, is softer than Shore A 40. Harder plastics may be rated on the Shore D scale. The number belongs to its Shore scale and is not a unit like MPa; values on different scales cannot be directly compared.
- Shore A 50
-
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
- 12 months
-
The time after application during which a skin forms on the surface of a sealant. Tool the joint before the skin develops, as adjusting it afterwards can affect the finish or adhesion. Temperature and humidity influence this time.
- Approximately 40 minutes
-
Elongation at break indicates how much a material can stretch during a tensile test before it breaks. It is expressed as a percentage (%) of the original length. At 100% elongation, the material has doubled in length just before breaking. A high value indicates a high ability to deform, but not how much force is needed.
- 400%
-
Sag resistance describes how well a paste, sealant or coating stays in place after application without running or slumping. It matters on vertical surfaces, in thick adhesive joints and for overhead repairs.
A product may be thixotropic: it becomes easier to work when stirred or spread, then thickens again at rest. This makes application easier without the material immediately running down the surface. Sag resistance is not the same as viscosity; behaviour after application also matters.
- Good
-
Tensile strength is the maximum tensile stress a material can withstand during a tensile test before failure. It is usually expressed in MPa (megapascals) or N/mm² (newtons per square millimetre); 1 MPa = 1 N/mm². Under comparable test conditions, a higher value means greater resistance to tension. In composites, fibre orientation also affects the result.
- 3 MPa
-
The curing mechanism explains how a product develops its final strength or shape. The main mechanisms are:
- Two-component reaction (2K): a chemical reaction begins once components A and B are mixed. Mixing ratio and working time are important.
- Moisture curing (often 1K): the product reacts with moisture in the surrounding air. Temperature, humidity and film thickness affect the process.
- UV curing: light of the appropriate wavelength triggers the reaction. Areas that are not exposed to the light may not cure fully.
- Physical drying: water or solvent evaporates. This is different from chemical curing.
Some products use more than one mechanism, so the correct application conditions depend on the particular system.
- Moisture-curing
- Net contents
- 300 ml
-
Working time is the period during which a product remains workable after mixing or activation, usually given in minutes at a specified temperature, often 20 °C. With reactive resins, the chemical reaction also continues in the mixing container, and larger quantities or higher temperatures can shorten this time. Working time is different from gel time and full curing time.
- Approximately 35 minutes
-
Heat resistance describes the temperature a material can withstand after correct processing and curing, usually expressed in degrees Celsius (°C). Continuous exposure is different from a brief temperature peak, and mechanical loading may also affect the limit. Heat resistance is not the same as the temperature at which the product can be applied.
- -40 to 90 °C
Reviews
Frequently bought together
Useful additions for your project.