Tec7 Wall Fix
At a glance
- For repairing concrete rot
- Vertical repairs
- Filler for wood rot
Tec7 Wall Fix is a professional 2-component lightweight epoxy mortar containing hollow glass beads, suitable for vertical repairs. The epoxy resin-based repair mortar is easy to apply in both thin and thick layers (up to 10 cm). The mortar has high compressive and tensile strength, exceeding that of concrete and does not require an adhesive primer or base coat. Wall Fix has excellent adhesion to most materials (concrete, stone, tiles, natural stone, wood and metals). In addition, the mortar is suitable for indoor and outdoor applications and is water and frost-resistant.
Benefits of Tec7 Wall Fix
- Lightweight material for vertical repairs.
- High compressive and tensile strength.
- Does not require an adhesive primer or base coat.
- Excellent adhesion to various substrates.
Directions for use
Pour the hardener (full bottle) into the epoxy mortar (bucket) and mix thoroughly using a slow-speed mixer for about 2 minutes to obtain a homogeneous mixture. Never add water, cement or other products. Apply Tec7 Wall Fix to a clean, dry and stable substrate.
- After curing the material can be sanded, ground, drilled, bonded, anchored and nailed.
Applications
- Repair of concrete damage.
- Repairing of concrete rot.
- Filler for tropical wood rot.
- Vertical repairs on stone, wood and concrete.
Specifications
Composition: epoxy resin with hollow and filled glass beads
Colour: dark sand-coloured
Solid content: 100%
Density: 1.663 kg/L
Adhesion:
- excellent adhesion to most building materials, the adhesion of the substrate, such as wood, stone, natural stone, concrete, etc.
- to metals: min. 2 N/mm2
- adhesion to synthetic materials is very limited
Processing time after mixing at 16°C: 40 minutes
Swimming pools: suitable
Chemical resistance: resistant to water, seawater, acids, alkalis, salts, oils, petrol, heating oil, urine, fertilisers, most solvents and aggressive vapours
Limited resistance to: strong solvents such as methylene chloride, dimethylformamide, acetone, methyl ethyl ketone and organic acids
Shelf life: at least 12 months in closed packaging, stored in a frost-free place
Product properties
The key technical properties clearly listed in one place.
- Article number
- LIJ000857
-
The chemical base describes the chemistry of an adhesive, sealant, resin or coating, such as epoxy, polyester, polyurethane, (methyl)methacrylate or a hybrid polymer. It affects curing, flexibility and adhesion. Products with the same chemical base are not necessarily suitable for the same applications.
- Epoxy resin with hollow and solid glass beads
-
Density describes the mass of a material per unit volume. Values may be given in g/cm³, kg/L or kg/m³; 1 g/cm³ equals 1 kg/L. For example, one litre of a liquid with a density of 1.2 kg/L weighs approximately 1.2 kg. Density helps convert between weight and volume, but it can vary with temperature.
- 1.663 kg/L volume
-
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
- At least 12 months
-
Solids content is the proportion of material remaining after volatile components have evaporated from a coating. It is stated as a percentage by weight or by volume (%); these are not interchangeable. Volume solids content helps estimate dry film thickness: with 60% volume solids, a 100 µm wet film will theoretically produce approximately 60 µm of dry film.
- Approximately: 100%
- Net contents
- 3 kg, 600 g
Safety information
Read the warnings and use appropriate protective equipment before handling the product.
Reviews
Frequently bought together
Useful additions for your project.