Liquid roofing material (Impermax B1K)
- 1-component roofing material
- Easy to use
- Colour: black
Impermax B1K is a high performance liquid applied roofing systeml. It consists of a 1-component polyurethane bitumen with solvents which creates a seamless waterproof membrane.
This liquid roofing material adheres completely to the surface, so you do not need to nail, burn or glue the material. In addition, in case of leakage, no water can pass under the membrane, making it easy to locate and repair leaks. Impermax liquid roofing is easy to process and is dry within 4 hours.
This product is suitable for new construction, repair and renovation.
Benefits of Impermax B1K
- Easy to process with roller and brush.
- The material adheres completely to the surface. The roofing therefore does not need to be nailed, burned or glued.
- Leaks or damages are easy to locate and repair.
- Easy to create and work on difficult details and shapes such as sloping edges, roof penetrations and skylights.
- Minimal fire risk because you are not working with open flames.
- Becomes waterproof quickly, almost immediately rainproof.
This product is mainly used for waterproofing and air-sealing outdoor constructions with little or no foot traffic. Examples are:
- Balconies, terraces.
- Flooring with light pedestrian traffic.
- Asphalt, EPDM and PVS trim.
- Flashing (details of waterproofing project with bituminous membrane)
Instructions for use
This liquid roofing material is ready to use straight from the bucket. You can mix the material with a spiral mixer on a drilling machine (this is not possible by hand). Dilution is not necessary. The liquid roofing material is suitable for use as a 1 or 2 layer system:
Impermax B1K is suitable for use as 1-layer system over existing roofing membranes such as bitumen, EPDM, PVC and asphalt (consumption: 1kg/m2).
The liquid roofing membrane is, in combination with polyester fleece, also suitable as complete roofing system (consumption: 2.5kg/m2).
Contents: 6 kg, 25 kg
VOC content: 70%
VOC content: 330 g/l
Viscosity: 5400 mPa.s (25°C)
Processing time: 8-12 hours
Drying time: 1-4 hours
Processing temperature: 0-30°C
Hardness: shore 35A
Maximum elongation: 400%
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
|H226||Flammable liquid and vapour.|
|H315||Causes skin irritation.|
|H317||May cause an allergic skin reaction.|
|H334||May cause allergy or asthma symptoms or breathing difficulties if inhaled.|
|P101||If medical advice is needed, have product container or label at hand.|
|P102||Keep out of reach of children.|
|P210||Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.|
|P261||Avoid breathing dust/fume/gas/mist/vapours/spray.|
|P280||Wear protective gloves/protective clothing/eye protection/face protection.|
|P342+P311||If experiencing respiratory symptoms: Call a POISON CENTER/doctor/…|
|P370+P378||In case of fire: Use… to extinguish.|
|P321||Specific treatment (see information on this label).|