IJmofix putty set
- Polyester putty
- Suitable for small repairs
- Fast curing
The IJmofix putty set from De IJssel is suitable for minor damages in polyester, wood, aluminum or on pre-treated metals above the waterline. The 2-component polyester putty is white and is therefore very suitable for repairs to white (or light-coloured) polyester substrates. This polyester putty has a fast setting and low shrinkage. In addition, IJmofix is easy to sand after 30 minutes.
Benefits of the IJmofix putty Set
- Specially developed for repairs of white (or light coloured) polyester substrates.
- Can be painted directly with DD Paint.
- Low shrinkage and fast curing.
- Excellent adhesion to polyester surfaces.
- Perfectly sandable after 30 minutes.
Instructions for use
Be sure to clean, degrease and sand the surface well before starting filling with IJmofix. Weigh the desired amount of IJmofix (base) and then mix it very thoroughly according to the correct mixing ratio (100 parts by weight of base, 2 parts by weight of hardener) with the hardener. Only prepare a quantity that can be applied within the processing time. Then apply the polyester putty as desired with a putty knife and smooth the surface as tightly as possible. After 60 minutes (at 20°C), you can apply another coat of IJmofix or Double Coat, after sanding the first coat with 120 to 180-grit paper.
Properties
Size: 500 grams
Colour: white
Mixing ratio: 100:2 (by weight)
Density: approx. 2.0 g/cm3
Recommended layer thickness: depending of the condition of the substrate
Dust dry: after 10 minutes
Sandable: after 30 minutes
Can be painted: after 60 minutes
Shelf life: can be stored in a cool and frost-free place for at least 6 months, if not mixed and in original package
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H226 | Flammable liquid and vapour. |
| H315 | Causes skin irritation. |
| H319 | Causes serious eye irritation. |
| H361 | Suspected of damaging fertility or the unborn child <state specific effect if known> <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>. |
| H372 | Causes damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P103 | Read label before use. |
| P210 | Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. |
| P260 | Do not breathe dust/fume/gas/mist/vapours/spray. |
| P303+P361+P353 | IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. |
| P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| P405 | Store locked up. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
