Double Coat DD Paint High Gloss 0.5 kg

Are you looking for DD Coat High Gloss? You will find a wide range in the webshop of Polyestershoppen.com and you can easily order online. Do you want to varnish and paint your boat? With DD Coat high gloss you ensure that your boat looks like new again! Choose a colour and start painting. Do you have any questions? Ask us and we will help you immediately.

Use of DD Coat High Gloss

The high-quality two-component polyester DD Coat high gloss is for embellishing and protecting polyester, epoxy, PVC, metal and wood. This two-component varnish is known for its colourfastness, high scratch resistance and long gloss retention. In addition, this polyester paint provides long-term protection against UV light.

DD Coat High Gloss is very suitable for giving your polyester boat a beautiful high gloss. This product is always supplied including the corresponding hardener. DD coat is easy to polish, making it easy to remove damages and scratches.

Benefits of DD Coat High Gloss

Do you use DD Coat High Gloss? Then you have these advantages:

• High scratch resistance.
• Colour fastness.
• Long gloss retention.
• High UV resistance.

Instructions for use DD Coat

Make sure you prepare the surface properly before applying DD Coat high gloss. Sand the surface with 280-grit paper and degrease with Double Coat degreaser. Dust can be removed with a tack cloth. Wood and metal surfacesshould be prepared thoroughly. First apply a suitable primer (HB coating or ZF primer).

Always wear proper protection when applying Double Coat paints. Therefore, we always use a suitable vapour mask, safety glasses, gloves and covering clothes.

Step-by-step plan 

You process DD Coat High Gloss using the following steps:

• Open the base component, stir it up and weigh the desired amount into a clean mixing cup. Always use (digital) scales for weighing.
• Then add the hardener in the correct ratio to the resin (67:33).
• Mix both components gently and scrape well along the side and bottom of the mixing jug. Now let the lacquer rest for 30 minutes.
• After resting, add approximately 3-5% brush thinner to the mixture. Stir well again.
• Apply DD Paint High Gloss evenly with a foam roller, brush or sprayer.
• Roll or brush the surface immediately without exerting excessive force.

After 24 hours (at 20°C) you can apply a second coat without sanding. The best result is obtained by sanding between coats and letting the penultimate coat dry for a few days. Then you can fine-sand it with 400 or 600-grit paper before applying the final coat. DD Lacquer is dust-dry after about 2 hours and fully cured after 5 days.

Product properties

Mixing ratio: 67 parts by weight of varnish and 33 parts by weight of hardener.
Consumption: approx. 125 grams/m2
Contents: 0.5 kg (base + hardener)
Application: can be applied by brush, roller or sprayer.
Brush thinner: 3 to 5% 
Spray thinner:  5 to 15% 
Colours: available in various colours. Colours can also be mixed together.
Finish: high gloss 
Processing time: approx. 2 hours
Available colours in 0.5 kg packaging: from 1 kg we also supply DD coat in all RAL colours.

Need help?

Would you like more information or advice on using DD Lacquer High Gloss? No problem, we are happy to help and advise you! View the information centre for an answer to your question or contact us directly on +31 85 022 0090. Want immediate assistance? Then send us a chat message. We will answer your questions quickly during office hours.