Polyester topcoat for swimming pools

Resistant to pool water
Colourfast
Finishing of swimming pools

This high-quality polyester topcoat has been specially developed for swimming pools and is provided with pigments that are resistant to the influence of chlorine water. This keeps the color beautiful for a long time. Topcoat for swimming pools is available in the popular colors that are often used for swimming pools.

This coating is the perfect finish for your existing or new polyester swimming pool. Existing polyester pools are easy to renovate with this topcoat by sanding the surface with sandpaper grit 60 and then applying the topcoat after degreasing. Topcoat gives a silk-gloss finish with a slight structure.

Features NPG topcoat

Slightly thixotropic, prevents sagging on vertical surfaces.
Pre-accelerated.
Fast curing.
Good coverage and filling capacity.
Dries tack-free.
High resistance to chemicals, including chlorine.

Available colours of topcoat for swimming pools

This topcoat is available in the colours below. These are the most common colours for a swimming pool.

Light blue (YT651)
Azure blue (YT653)
Sky blue (YT7945)
Grass green (RAL 6010)
Pure white (RAL 9010)
Antracite Grey (RAL 7016)
Dusty grey (RAL 7037)

Packaging: 5 kg, 25 kg
Gloss: semi-gloss
MEKP hardener: approx. 2%
Consumption: approx. 300-400 gr/m²

Do you have a special color request? Please contact us to discuss the possibilities.

Product properties

Recommended film thickness: 300 - 400 µm (dry), depending on application
Processing time: 20 minutes (at 20 degrees)
Full cure: 24-48 hours
Minimum processing temperature: 15°C
Shelf life: 3 to 6 months

Below is an overview of the amount of hardener required per quantity of topcoat:

Topcoat	Hardener
5 kg	100 ml hardener
25 kg	500 ml hardener

We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.

Safety equipment

Gevaar

Code	Description
H226	Flammable liquid and vapour.
H304	May be fatal if swallowed and enters airways.
H315	Causes skin irritation.
H317	May cause an allergic skin reaction.
H319	Causes serious eye irritation.
H332	Harmful if inhaled.
H335	May cause respiratory irritation.
H361	Suspected of damaging fertility or the unborn child <state specific effect if known> <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
H372	Causes damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
H412	Harmful to aquatic life with long lasting effects.
P101	If medical advice is needed, have product container or label at hand.
P102	Keep out of reach of children.
P260	Do not breathe dust/fume/gas/mist/vapours/spray.
P270	Do no eat, drink or smoke when using this product.
P314	Get medical advice/attention if you feel unwell.
P301+P310	IF SWALLOWED: Immediately call a POISON CENTER/doctor/…
P405	Store locked up.
P501B	Dispose of contents/container in accordance with in accordance with local regulation