Polyestershoppen
International shipping
Own stock & in-house production
Expert technical advice
Supplies for professionals & industry

G8 Super Polyurethane resin

View reviews
G8 Super Polyurethane resin

At a glance

  • High-gloss PU resin
  • UV-resistant
  • Scratch-resistant
Read more about this product

Personal product advice

Our product specialists are happy to help.

+3185 0220090 WhatsApp
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops

Product description

G8 Super Polyurethane Resin is a high-quality, 1-component solvent-based polyurethane resin. It cures through humidity in the air and is applied in thin layers. Once cured, G8 Super forms a durable, high-gloss topcoat that is highly resistant to scratches, UV radiation, and yellowing.

Thanks to its strong adhesion to porous substrates, G8 Super is versatile and suitable for a wide range of applications. In addition, the coating provides excellent chemical resistance against solvents, diluted acids, and bases.

Applications

G8 Super Polyurethane Resin is suitable for:

  • Waterproofing porous substrates.
  • High-gloss varnish for interior and exterior woodwork.
  • Sealing materials such as wood, copper, epoxy, polyurethane and polyester laminate.

Directions for use 

  1. Ensure the surface is dry, grease-free and dust-free.
  2. Apply G8 Super with a brush or roller (consumption: approximately 200-300g/m², depending on the surface).
  3. For porous surfaces: dilute the first coat with 20-25% PU thinner, the second coat with 0-25%, and apply the final coat undiluted.
  4. Apply the next coat after 2-4 hours, once the previous layer is tack-free. Do not exceed 8 hours between coats.
  5. For a smooth finish, lightly sand the surface before applying the final coat.
  6. Seal any opened can tightyl, as the contents may react with humidity and harden.

Wear a suitable vapour mask when working with polyurethane resin.

Specifications

Consumption: approx. 200-300 gr/m² per coat
Packaging: 1 kg, 5 kg, 10 kg
Colour: transparent
Viscosity: 150 mPa.s
Consistency: liquid
Solids content: 50%
Density: 0.98 g/cm3
Drying time: 2 - 4 hours (depending on climate)
Shelf life: at least 6 months in unopened packaging

 









 

 

Product properties

The key technical properties clearly listed in one place.

Article number
POL000827
Type of product
PU casting resin

Safety information

Read the warnings and use appropriate protective equipment before handling the product.

Recommended protective equipment

Hazard pictograms

Warnings and precautions

H225 Highly flammable liquid and vapour.
H304 May be fatal if swallowed and enters airways.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H332 Harmful if inhaled.
H335 May cause respiratory irritation.
H340 May cause genetic defects <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
H350 May cause cancer <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P103 Read label before use.
P331 Do NOT induce vomiting.
P301+P310 IF SWALLOWED: Immediately call a POISON CENTER/doctor/…
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P362+P364 Take off contaminated clothing and wash it before reuse.
P405 Store locked up.
P501 Dispose of contents/container in accordance with in accordance with local regulation
EUH204 Contains isocyanates. May produce an allergic reaction.
MDI As from 24 August 2023 adequate training is required before industrial or professional use

Reviews

Useful additions for your project.

Top