International shipping
Own stock & in-house production
Expert technical advice
Supplies for professionals & industry

PU thinner

At a glance

  • PU-based thinner
  • For deep impregnation
  • Contents: 1 litre
Read more about this product

Personal product advice

Our product specialists are happy to help.

Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops

Product description

Xylene-based PU thinner for diluting RESION polyester primer and G8 Super polyurethane resin.

Directions for use

We recommend diluting the products below with this thinner:

The quantity to be added depends on the nature of the substrate and the application (priming, painting or coating). Observe the maximum permissible quantities. Always wear nitrile gloves and a suitable vapour mask when working with PU thinner.

Specifications

Contents: 1 litre
Colour: transparent
Addition: 5-200%
Viscosity: 80 mPa.s
Specific gravity: approx. 0.88 g/cm3
Shelf life: 12 months in a sealed container
Consistency: liquid

Product properties

The key technical properties clearly listed in one place.

Article number
POL000475
Product type
Thinner

Safety information

Read the warnings and use appropriate protective equipment before handling the product.

Recommended protective equipment

Hazard pictograms

Warnings and precautions

H226 Flammable liquid and vapour.
H312 Harmful in contact with skin.
H315 Causes skin irritation.
H332 Harmful if inhaled.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P241 Use explosion-proof [electrical/ventilating/lighting/…] equipment.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P501 Dispose of contents/container in accordance with in accordance with local regulation

Reviews

Useful additions for your project.

Top