Aqua Cast Black

Aqua Cast is now also available as a pre-colored version! Aqua Cast Black is just as environmentally friendly as Eli-Chem's standard Aqua Cast. The difference, however, is that this variant is pre-pigmented with an opaque black colour that has the appearance of a ceramic finish.

What is Aqua Cast?

Aqua Cast is an environmentally friendly casting compound made from powder and polymer that can be easily mixed with water. Through a unique formula, the acrylic polymer additives are fused into one powder. All the properties of a traditional acrylic resin remain the same. Aqua Cast therefore hardens rock hard, is easy to use and cures at lightning speed.

With Aqua Cast you can make great plaster look figurines, coasters, jewellery and many other great items. This product is similar to Acrystal, Porcelain plaster, Acrylic One and Jesmonite.

Benefits of Aqua Cast

• Blackened.
• Environmentally friendly
• Suitable for use in any silicone mould.
• Fireproof.
• Fast curing.
• Can be used to create terrazzo pieces.

Instructions for use

Aqua Cast Black is easy to use. To do this, follow the steps below. When working with Aqua Cast, always wear nitrile gloves and protective clothing to prevent skin contact.

• Weigh the desired amount of powder on a (digital) scale.
• Then weigh the correct amount of water according to the mixing ratio (100:25, 100 grams of powder and 25 ml of water).
• Slowly add the powder to the water and mix well for 2-4 minutes until a lump-free mass is obtained.
• Pour the mixture directly into the desired silicone mould and tap/shake the mould to remove any air bubbles.
• Let it harden for 60-90 minutes before removing it from the mould.
• After 1-2 days the Aqua Cast has fully hardened.

Tip: use Hydroflow sealer to protect Aqua Cast castings against stains.

Product properties

Packaging: 1.1 kg, 3 kg
Mixing ratio: 100:25 (by weight)
Processing time: 10 minutes (at 22℃)
Curing time: 60-90 minutes
Full cure: 24 to 48 hours
Shelf life: infinite (if stored dry)
Mixing table: