Motip Clear Coat
- High-gloss or matte
- Scratch and impact resistant
- UV-resistant and colourfast
With this clear coat, you can finish your Resin Art artwork with a high-gloss or matte look. Motip Clear Coat is available in both high-gloss and matte finishes and offers good resistance to weathering and UV light. It can also be used on polyester products.
Features Motip Clear Coat
- Fast-drying.
- Lasting gloss.
- Scratch free and shock proof.
- Resistant to weather influences and UV-light.
- Corrosion preventive.
- Excellent adhesion.
- Heat resistant up to 110 degrees (after 1 week curing).
How to apply to polyester casting resin (Resin Art)
- Slightly sand the surface (grain 600).
- Remove dust and grease from the surface.
- Apply the clear lacquer in several thin layers.
- Allow the varnish to set.
Specifications
Packaging: aerosol 500 ml
Gloss: high gloss or matte
Dust dry: 5-10 minutes
Completely cry: 120 minutes
Overcoatable: 120 minutes
Minimum working temperature: 10°C
Maximum working temperature: 25°C
Temperature resistance: 110°C
Shelf life: 10 years
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H222 | Extremely flammable aerosol. |
| H229 | Pressurised container: May burst if heated. |
| H315 | Causes skin irritation. |
| H318 | Causes serious eye damage. |
| H336 | May cause drowsiness or dizziness. |
| H412 | Harmful to aquatic life with long lasting effects. |
| P102 | Keep out of reach of children. |
| P210 | Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. |
| P211 | Do not spray on an open flame or other ignition source. |
| P251 | Do not pierce or burn, even after use. |
| P260 | Do not breathe dust/fume/gas/mist/vapours/spray. |
| P410+P412 | Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
