Infusion Mesh
At a glance
- Fast and even infusion
- Easy to use
- Slightly flexible
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
Product description
This infusion mesh is specially developed for vacuum infusion of thicker laminates from approximately 1,200 g/m². Thanks to its low and compact profile, the flow mesh ensures fast and even distribution of resin with minimal resin loss.
The infusion mesh is flexible and easy to handle. It adheres well to perforated film and is made of soft polypropylene (PP), preventing damage to the vacuum film. This product is suitable for use with polyester, vinylester, and epoxy resins and is widely used in the production of composite parts.
Specifications
Material: PP
Colour: green
Weight: 103 g/m2
Thickness: 0.93 mm
Width: 121 cm
Recommended processing temperature: up to 120 °C
Max. temperature: 150 °C
Packaging
- Roll 121 cm x 5 metres (approx. 6 m2)
- Roll 121 cm x 20 metres (approx. 24 m2)
- Roll 121 cm x 100 metres (approx. 121 m2)
Product properties
The key technical properties clearly listed in one place.
- Article number
- VAC000421
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- Injectiegaas
-
The recommended application temperature range indicates the conditions under which the product can generally be applied and cured properly. Three temperatures matter:
- Air: the temperature in the workshop or outdoors.
- Substrate: the temperature of the surface being treated.
- Product: the temperature of the resin, adhesive or coating itself.
A cold substrate can cause condensation and affect adhesion. At higher temperatures, two-component products may react faster, reducing their working time. Check the dew point and follow the product instructions.
- Up to 120 °C
-
The measurement across a product from one side to the other, for example for rolls, panels or fabrics. With rolled materials, the usable width may differ from the overall width.
- 1.210 mm
-
The physical thickness of the supplied material, such as a panel, pad, film or foam sheet. This differs from the thickness of a liquid coating applied to a surface.
- 0.93 mm
-
The base material a product or part is made from, such as HDPE, aluminium, glass fibre or foam. Material choice affects weight, stiffness, chemical resistance and how the part can be worked or processed.
- Polypropylene (PP)
-
Areal weight is the weight of one square metre of dry reinforcement, expressed in g/m² (grams per square metre). For example, 200 g/m² glass fabric contains 200 grams of dry fibres per m², without resin. Areal weight helps with reinforcement selection and resin consumption estimates, but it is not the final laminate thickness.
- 103 g/m²
Reviews
Frequently bought together
Useful additions for your project.
