- Vacuum set (chamber and pump
- Large size
- For degassing resins
Large vacuum venting set consisting of a vacuum chamber, BILTEC vacuum pump with pressure gauge and all supplies to get started right away. The set is available in different sizes and comes with a matching vacuum pump as standard.
The large venting set is easy to use, is low-noise and is equipped with an electrically controlled valve. This valve opens when you turn on the vacuum pump and closes when you stop your pump. This prevents air from entering your project when the vacuum pump is off. In addition, the vacuum pump has a manometer (vacuum gauge) that allows you to accurately record the pressure achieved.
This set is suitable for venting polyester resins, epoxy resins, polyurethane resins and silicone rubbers and more. Moreover, you can also use this set for accelerated drying of flowers, wood, electronics or other items.
Scope of supply
This large BILTEC vacuum degassing set consists of:
Properties of the vacuum pump
Connection: 8 mm hose barb
Gauge: 0-1000 mbar
Final vacuum: 0.05 mbar or 0.003 mbar
Voltage: 230 volt
Noise level: 55 dB
Switch: on/off, mounted on pump body
Properties of the vacuum chambre
Lid: transparent and equiped with release valve
Material: stainless steel, acrylic and rubber
Connection: for 8x16 mm rubber hose
Valve: degassing – stop – aeration
Gauge: -1 up to 0 bar
Scope of supply:
|Version||Dimensions||Recommended pump||Recommended bucket|
|16.5 litre vacuum chamber||225x270 mm||BILTEC BT115VM||5 litre|
|24 litre vacuum chamber||300x300 mm||VP140N||10 litre|
|72 litre vacuum chamber||450x450 mm||VP1200N||20 litre|
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.