Vacuum dome

Ideal for venting and drying
With release valve
In 2,15 ltr or 9,20 ltr versions

With a vacuum dome you can easily prevent air bubbles in your castings. Simply vent your casting resin so that you can cast bubble-free. The dome is available in 2 sizes: 2.15 litres and 9.20 litres. It features a rubber sealing ring, and on the transparent top there is a vent valve with hose connection. This connection fits vacuum hoses of 8–10 mm.

The dome is supplied with an inner bowl and spare valve stopper.

Tip: met de vacuüm ontluchtingsset kun je direct aan de slag met het ontgassen van jouw gietwerk!

Properties

Colour: white base, transparent top
Available spare parts: seal, complete vent valve
Material:

Dome housing: PP
Lid and vacuum valve: PC
Needle: PE

Dimensions:

Variant	Diameter	Height	Suitable mixing cup^*
2.15 litres	150 mm	190 mm	600 ml
9.20 litres	250 mm	300 mm	2000 ml

*You can fill the mixing cup about 20-25% without risk of overflow during the process.

Spare parts for the vacuum dome can be easily ordered ordered separately!

We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.