Squeegee for screeds

For large screeds
Stainless steel version
With holder for stick

A stainless steel squeegee for poured floors simplifies the application of poured floor systems. The sturdy stainless steel squeegee is easy to use and works very efficiently. Pour a strip of casting compound along a wall and remove it with the squeegee until the casting compound is used up. Then pour another strip of casting compound and work backward until the entire room is finished. It works simply and very quickly.

This squeegee is 50 cm wide and is equipped with a broom handle attachment with a maximum diameter of 26 mm.

Please note: let the squeegee glide over the floor while spreading the resin without exerting too much pressure. This prevents wear of the pins.

Variations

The BILTEC squeegee for screeds is available in 2 heights:

Squeegee 1.4 mm
Use this squeegee for epoxy cast floors.
Squeegee 2.2 mm
Use this squeegee for PU floors and for epoxy egalisation.

Attention: the broomstick in the picture is not included.

Features

Brand: BILTEC Width: 50 cm
Pin height: 1.4 or 2.2 mm
Material: stainless steel
Scope of delivery: 1 squeegee, 2 mounting brackets, 4 wing nuts
Suitable for:

We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.