Westlake RIMR135 | Epoxyhars | 1 kg
UFI: RGA0-W0YR-N00A-HWFK
Are you looking for an epoxy infusion resin for your project? At Polyestershoppen, an epoxy wholesaler, you will find a wide range of epoxy resins. Our range includes Westlake/Hexion RIM135 Infusion Resin. This Epikote Resin MGS is a low-viscosity epoxy resin that cures well at room temperature. The infusion resin is available with various hardeners, which allow you to adjust the processing and performance properties. The pot life can therefore be adjusted from 25 minutes to approx. 5 hours. The hardeners can be mixed with one another.
Manufactured parts can be removed from the mould and machined after curing at room temperature. Short curing times are possible at mould temperatures of up to 100 °C. After post-curing, the cured resin can be used for components exposed to temperatures of up to 80 °C.
Westlake MGS RIM135 is certified by the German classification society 'Germanischer Lloyd'. This certification makes Epikote Resin MGS particularly suitable for yacht building and the manufacture and repair of wind turbine blades.
Specifications
| Pot life | Mixing ratio | Mixing ratio | Demoulding time | Tg | |
| Resin RIMR135 | 100 g / 20 °C | Weight | Volume | After curing at 20 °C | After curing at 60 °C |
| Hardener RIMH134 | 25 minutes | 100:30 | 100:35 | 8-10 hours | 80 °C |
| Hardener RIMH1366 | 210 minutes | 100:30 | 100:35 | 18-24 hours | 80 °C |
| Hardener RIMH137 | 300 minutes | 100:30 | 100:35 | 48 hours | 80 °C |
We have a large stock of Westlake (Hexion) Epoxy Infusion Resin. Both individual and business customers can order the right epoxy for their project in just a few clicks. Need a larger quantity of epoxy resin or want to receive a customised quote? Then feel free to contact us. Our specialists will be happy to help you choose the right Westlake epoxy.
The key technical properties clearly listed in one place.
Mixing ratio indicates how much of each component is needed, for example resin (A) and hardener (B). A ratio of 100:50 by weight means 100 grams of A to 50 grams of B; by volume you might use millilitres. Weight and volume ratios are not necessarily the same because the components may have different densities. Accurate measuring is important for proper curing.
Curing time is the period a product needs to reach a specified stage of cure. It is usually given in hours or days, often at a reference temperature such as 20 °C. A product may be tack-free or safe to handle before reaching its full mechanical and chemical resistance. Film thickness and mixed quantity may also affect the time.
Working time is the period during which a product remains workable after mixing or activation, usually given in minutes at a specified temperature, often 20 °C. With reactive resins, the chemical reaction also continues in the mixing container, and larger quantities or higher temperatures can shorten this time. Working time is different from gel time and full curing time.
Read the warnings and use appropriate protective equipment before handling the product.
UFI: RGA0-W0YR-N00A-HWFK
Useful additions for your project.