Peel ply fabric

Peel ply provides an even, lightly textured surface on your laminate and can save a considerable amount of sanding work. The fabric is applied as the final layer on the laminate and pressed down firmly using a consolidation roller. This ensures that the peel ply conforms closely to the laminate and creates an even surface after curing.

After curing, the peel ply can easily be removed from the laminate. It leaves behind a lightly roughened, even surface that is suitable as a base for an additional laminate layer, bonding or coating. In many cases, this eliminates the need for sanding.

The peel ply is suitable for use with epoxy, polyester and vinylester resin and can be used for hand laminating, vacuum infusion and autoclave processing.

Features of peel ply fabric

• Saves time and reduces or eliminates sanding.
• Leaves an even, lightly roughened surface.
• Ideal surface for bonding, laminating or coating.
• Easy to remove from the laminate after curing.
• Suitable for hand laminating, vacuum infusion and autoclave processing.
• Features red/blue tracer threads, making the peel ply easy to identify.

Specifications

Material: nylon (polyamide)
Colour: white
Weight: 85 g/m²
Thickness: 130 µm
Width: 150 cm
Recommended processing temperature: 220 °C
Maximum temperature: 232 °C
Packaging:

• 1.5 x 1 metre (1.5 m², folded or on a roll)
• 1.5 x 5 metres (7.5 m², folded or on a roll)
• 1.5 x 20 metres (30 m², folded as 4 x 5 metres or on a 1 x 20 metre roll)
• 1.5 x 100 metres (150 m², on a roll)