RESION UV Epoxy resin (old resin formula)

RESION UV Epoxy (0,8 kg)
RESION UV Epoxy (1,6 kg)
RESION UV Epoxy (160 gram)
RESION UV Epoxy (0,8 kg)
RESION UV Epoxy (1,6 kg)
RESION UV Epoxy (160 gram)
  • Highly UV resistant
  • Castings up to 3cm
  • Mixing ratio: 100:60
Reason for sale: remaining stock of our UV-resistant epoxy resin with the old formula. Looking for an epoxy resin with exceptionally high transparency? Then choose our updated RESION UV Epoxy casting resin (UV CAST25). Thanks to the addition of a new additive, this resin appears significantly more transparent.

RESION UV Epoxy resin (UV Cast25) is a high-quality epoxy casting resin with a very high UV resistance and transparency. This UV casting resin has been specially developed to prevent long-term discoloration by sunlight. Adding a UV stabiliser to this product is therefore not necessary! This makes RESION UV epoxy resin even easier to use and very versatile. In addition, the quality of the resin is much higher, which in turn gives better results.

Benefits of RESION UV Epoxy resin

  • Very high quality epoxy.
  • Highest UV resistance on the market.
  • Highly transparent.
  • Solvent-free.
  • Odourless.
  • Can be poured up to 3 cm thick.
  • Adheres to almost all surfaces (like concrete, wood, plastics).

UV resistant resin

RESION's epoxy resin has been extensively tested for UV resistance. By intensively testing the resin for an extended period in a specially developed UV cabinet, we can guarantee the highest quality and wide applicability. The UV-resistant resin is therefore ideal to use for art, tables, jewellery, counter tops and much more.

Note: for outdoor applications, we recommend varnishing the epoxy with transparent DD paint.

Directions for use

Like all other RESION resins, this epoxy resin is easy to use. Simply mix the base and hardener together according to the ratio indicated on the packaging (100:60) and make sure to stir well for 3 minutes. We also have handy taps for the jerrycans (from 8 kg sets). You can also pour the epoxy into small plastic bottles to simplify distribution. Processing RESION UV Epoxy is very simple if you follow these steps:   

  • Weigh the base component (A) and hardener (B) thoroughly according to the mixing ratio indicated on the packaging (100 parts by weight of resin to 60 parts by weight of hardener).
  • Mix the base and hardener well for 3 minutes. Also scrape well along the sides and bottom of the mixing cup!
  • If desired, add pigments to colour the resin.
  • Apply the epoxy to the surface you are going to use (the pot life is 30-60 minutes at 20℃).
  • After application, let the UV-resistant epoxy cure for about 12-18 hours before it is manageable (note: after 3-5 days, the epoxy is only fully cured).
Tip: weighing and mixing the epoxy is very important for a good end result. So do this meticulously and always use a scale.

Specifications

Unit  Resin (EP 101UV)  Hardener (EP 121UV)
160 gr 100 gr 60 gr
0.8 kg 0.5 kg 0.3 kg
8 kg 5 kg 3 kg
16 kg 10 kg 6 kg
32 kg  20 kg 12 kg
64 kg 40 kg 24 kg

Mixing ratio: 100:60 (100 grams of resin, 60 grams of hardener)
Viscosity:
low (approx. 700 mPa.s) 
Pot life: 
30-60 minutes at 20°C
Minimum processing temperature: 
12°C
Dust dry:
after 6-12 hours (20°C) 
Manageable:
after 12-18 hours (20°C) 
Full cure:
3-5 days
Heat resistance:
40-45 °C
Shelf life:
1 year (stored in a dark place at 15-20°C)

You can find all mixing ratios in the Epoxy mixing schedule (100:60).

Order your UV resin

You can order RESION's UV epoxy casting resin easily at Polyestershoppen. If you order on working days before 5:00 PM CET (Central European Time), your RESION UV Epoxy will be shipped the same day! Would you like more information about RESION UV epoxy resin or our other products? We are happy to advise you. Please contact us via WhatsApp, e-mail (support@polyestershoppen.com) or by phone +31850220090.

 

We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.

EP121UV | UV CAST25 Hardener | 60 gram

Safety equipment

Gevaar

Code Description
H302 Harmful if swallowed.
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H411 Toxic to aquatic life with long lasting effects.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501B Dispose of contents/container in accordance with in accordance with local regulation

Product Choices

RESION
11,19 13,99
€ 2,80 (20%) discount
Contents Price
pieces

Receive a back in stock email.

  • Extensive range!
  • PayPal, Mastercard, Visa, American Express
  • Fast reliable delivery in Europe (1-5 days)
  • Free advice from a specialist!
Product advisor

We will be happy to give you advice!