3M Scotch-Weld DP8005 Structural Plastic Adhesive
- Bonds PE and PP
- Very strong bonding
- In handy double syringe
With 3M Scotch-Weld DP8010 Acrylic Adhesive you can effortlessly bond low surface energy plastics, such as polyethylene (PE) and polypropylene (PP), to each other without surface treatment. These materials are often difficult to bond, which makes DP8005 Acrylic Adhesive a very popular adhesive. Cures at room temperature without heat or other chemicals to eliminate complex adhesion processes. In addition, the adhesive has excellent resistance to water and humidity combined with very good chemical resistance results in a bond that can withstand a variety of applications and conditions.
Main features 3M Scotch-Weld DP8005
- Also suitable for bonding polyethylene (PE), polypropene (PP) and other materials.
- Little to no surface treatment required.
- Excellent resistance to water and humidity.
- Short open time (10 minutes).
- Cures at room temperature.
Glue for PP (polypropylene)
Polypropylene, often abbreviated as PP, is a fairly hard plastic with high impact resistance and chemical resistance. The material is lightweight and is used for containers and jerry cans, among other things. Not every glue is suitable for bonding this plastic, but with 3M Scotch-Weld DP8005 you can easily bond PP to various surfaces.
In addition to bonding PP, you can also use this acrylic glue very well for bonding PE (polyethylene), HDPE, ABS, PMMA, aluminum, bare steel and galvanized steel. A very versatile glue! Because these plastics are processed in so many products, you will certainly need the 3M glue regularly when you are doing DIY.
Specifications Scotch-Weld DP8005
| DP8005 | |
| Contents | 45 ml |
| Colour | Off-White |
| Open time | 2.5 - 3 minutes |
| Time to initial strength | 20 minutes |
| Hardness | Shore D 55 |
| Odour | Low odour |
| Shear strength | 6.9 N/mm² |
| Peel strength | 28 N/mm² |
| Chemical resistance | ** |
| Viscosity | 17.000 mPa.s |
| Specific gravity | 1.00 g/cm³ |
| Application gun | LS50-4 (50 ml) |
| Suitable mixing tube | Mixing tube B |
Adherence Scotch-Weld DP8005
| DP8005 | |
| Bonds to PE (Polyethylene) | ** |
| Bonds to HDPE | ** |
| Bonds to PP (polypropylene) | ** |
| Bonds to PTFE (Teflon) | |
| Bonds to ABS | *** |
| Bonds to PC | * |
| Bonds to PMMA | ** |
| Bonds to fibre reinforced products | * |
| Bonds to aluminum | *** |
| Bonds to galvanized steel | *** |
| Bonds to bare staal | *** |
Order 3M glue at Polyestershoppen
Bonding polyethylene and polypropylene together or bonding them to other surfaces has never been easier. Order this 3M DP8005 glue easily online. If you order before 5:00 PM CET (Central European Time), your order will be shipped the same day! Do you have any questions? Take a look at our ons informaton centre, contact us by calling +31 85 022 0090 or send an email to support@polyestershoppen.com.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
Safety equipment
Waarschuwing
| Code | Description |
|---|---|
| H315 | Causes skin irritation. |
| H317 | May cause an allergic skin reaction. |
| H319 | Causes serious eye irritation. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| P333+P313 | If skin irritation or rash occurs: Get medical advice/attention. |
