Polyestershoppen
International shipping
Own stock & in-house production
Expert technical advice
Supplies for professionals & industry

Araldite 2047-1 Methacrylate Adhesive

View reviews
Araldite 2047-1 (50 ml)
Araldite 2047-1 (480 ml)
Araldite 2047-1 Methacrylate Adhesive
Araldite 2047-1

At a glance

  • Resistant to low temperature
  • Gap-filling
  • Resistant to dynamic loads
Read more about this product

Not sure about your choice?

Want to know which Araldite adhesive you need? Use our selection tool!

Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops

Product description

Araldite 2047-1 is a room-temperature curing methacrylate adhesive specifically developed for the structural bonding of metals and plastics. Thanks to its advanced chemical formulation, time-consuming or costly surface pre-treatment is often unnecessary or can be kept to a minimum. The adhesive offers excellent gap-filling properties and delivers outstanding performance and impact resistance across a wide temperature range.

Tip: you can use Araldite 2051 or Araldite 2053 as alternative products with similar properties.

Features of Araldite 2047-1 methacrylate adhesive

  • Minimal surface preparation required.
  • Excellent gap-filling capability up to 5 mm.
  • High impact resistance across a wide temperature range.
  • Outstanding performance at low temperatures.

Applications

Araldite 2047-1 is suitable for difficult-to-bond materials, including:

  • GRP, SMC, GRE and thermoset composites.
  • ABS, PVC and acrylics.
  • Polycarbonate.
  • Ferrous metals, aluminium and copper.
  • Polyamides, polystyrene foams and polyurethane foams.
  • Various rubbers.
  • Glass, quartz and gemstones.
  • Ceramics.

Specifications

Colour: red
Mixing ratio: 10:1
Specific gravity: 1.2 g/cm3
Shear strength: 15 N/mm2
Peel strength: 3 N/mm2
Viscosity: 70.000 mPa.s
Gap-filling capacity: up to 5 mm
Temperature resistance: -40°C to +80°C
Minimum curing time for initial strength: 5 hours for 1 N/mm2 at 23°C
Packaging:

  • 50 ml double cartridge (handgun or pneumatic gun required)
  • 480 ml double cartridge (handgun or pneumatic gun required)

Application gun:

Mixing nozzles:

Product properties

The key technical properties clearly listed in one place.

Article number
LIJ000201
Spleetvullend vermogen
1mm tot 2mm, 2mm tot 4mm, 4mm tot 6mm
Open tijd
1 tot 10 minuten
Kleur
Rood
Type lijm
Methyl Methacrylaatlijm
Hecht zeer goed op
Glas/Epoxy (GRE), SMC, ABS, PVC, Polycarbonaat (PC), Aluminium, Koper, Polystyreenschuim (EPS/XPS), Polyurethaanschuim (PUR/PIR), Rubber, Glas, Messing, Staal, Roestvast staal (RVS), Koolstof/Epoxy (CFRP)

Safety information

Read the warnings and use appropriate protective equipment before handling the product.

Recommended protective equipment

Hazard pictograms

Warnings and precautions

H225 Highly flammable liquid and vapour.
H242 Heating may cause a fire.
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H318 Causes serious eye damage.
H319 Causes serious eye irritation.
H335 May cause respiratory irritation.
H400 Very toxic to aquatic life.
P210 Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P220 Keep away from clothing and other combustible materials.
P233 Keep container tightly closed.
P234 Keep only in original packaging.
P235 Keep cool.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P362+P364 Take off contaminated clothing and wash it before reuse.
P370+P378 In case of fire: Use… to extinguish.
P410 Protect from sunlight.
P420 Store separately.
P501 Dispose of contents/container in accordance with in accordance with local regulation

Reviews

Useful additions for your project.

Top