- Very strong adhesive
- Handy double syringe
- No application gun required
Araldite Rapid is a fast cure, multi-purpose, 2-component, room temperature curing epoxy adhesive of high strength and toughness which is easy to apply. Cut open the spouts of the cartridge and squeeze enough adhesive onto a putty knife or mixing board. Mix both components carefully with a mixing spatula or putty knife. The adhesive is now ready for use.
Features Araldite Rapid Epoxy Adhesive
- Fast curing epoxy adhesive.
- Good resistance to chemicals and heat.
- Easy to process.
Araldite Rapid Epoxy Adhesive is suitable for bonding a wide variety of materials:
- Ferrous metals and aluminum, copper, zinc and galvanised products.
- Various types of rubber.
- Glass, quartz and precious stones.
- Ceramic materials.
Initial strength: after 20 minutes (1 N/mm2 on aluminum at 23°C)
Temperature resistance: -60°C to +100°C
Specific gravity: 1.18 g/cm3
Shear strength: 19 N/mm2
Peel strength: 5.5 N/mm2
Viscosity: 30,000 mPa·s
Gap filling capacity: up to 0.5 mm
Packaging: double syringe 24 ml or set of 2 tubes of 15 ml
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
|Causes skin irritation.
|May cause an allergic skin reaction.
|Causes serious eye irritation.
|Toxic to aquatic life with long lasting effects.
|Harmful to aquatic life with long lasting effects.
|If medical advice is needed, have product container or label at hand.
|Keep out of reach of children.
|Avoid breathing dust/fume/gas/mist/vapours/spray.
|Avoid release to the environment.
|Wear protective gloves/protective clothing/eye protection/face protection.
|If skin irritation or rash occurs: Get medical advice/attention.
|Wash hands thoroughly after handling.