UFI: X361-S0QK-W003-KYM6
Araldite Standard Epoxy Adhesive
At a glance
- Strong epoxy adhesive
- Handy double syringe
- No application gun required
Not sure about your choice?
Want to know which Araldite adhesive you need? Use our selection tool!
Araldite Standard is a strong, versatile, solvent-free epoxy adhesive suitable for bonding a wide range of materials. It is ideal for durable bonds and repairs, offering excellent resistance to chemicals and water. The adhesive has a working time of 2 hours at room temperature and reaches handling strength after 6 hours.
Features of Araldite Standard epoxy adhesive
- Strong universal epoxy adhesive.
- High chemical resistance and water resistance.
- Long shelf life.
Applications
Araldite Standard epoxy adhesive is suitable for bonding the following materials:
- Metal.
- Wood.
- Masonry.
- Ceramics.
- Glass.
- Dry concrete.
- Chipboard.
- Leather.
- Cardboard.
- Fabric.
- Rubber.
- Most plastics (except polyethylene, polypropylene and PTFE (Teflon)).
Specifications
Adheres to: metal, wood, ceramics, glass, leather and most plastics
Temperature resistance: -30 °C to +65 °C (after curing)
Colour: clear
Packaging: 24 ml dual syringe or 2 x 15 ml tube set
Working time: 2 hours (at room temperature)
Time to achieve handling strength: 6 hours
Product properties
The key technical properties clearly listed in one place.
- Article number
- LIJ000236
-
Adhesive type describes the family of adhesive or sealant, such as epoxy adhesive, (methyl)methacrylate adhesive, polyurethane adhesive or polymer sealant. Its chemistry affects processing, curing, flexibility and adhesion. Products of the same type may still differ, so check the suitable substrates and application instructions.
- Epoxylijm
-
Open time is the period during which an applied adhesive, sealant or mortar can still be assembled, positioned or adjusted. It is usually given in minutes under specified conditions, often around 20 or 23 °C. Open time generally starts at application and may differ from the working time after mixing.
- meer dan 60 minuten
- Colour
- Transparant
-
This property lists the substrates on which an adhesive, resin or coating can achieve strong adhesion according to the product information. The result also depends on surface preparation.
- Cleaning and degreasing: removes dirt, oil and other substances that interfere with bonding.
- Sanding or roughening: can improve adhesion when suitable for the substrate.
- Primer: required or recommended for some surfaces.
Materials such as PE, PP and PTFE are difficult to bond with many conventional adhesives and may need a specialist adhesive or pretreatment. If in doubt, test adhesion on a small area.
- Staal, Hout, Steen, Keramiek, Glas, Beton, Rubber, Metal, Leather, Many plastics
-
At this point, the material is generally firm enough to handle carefully, move or remove from a mould. Sanding, heavier loads or extended use may require further curing.
- 6 hours
-
Working time is the period during which a product remains workable after mixing or activation, usually given in minutes at a specified temperature, often 20 °C. With reactive resins, the chemical reaction also continues in the mixing container, and larger quantities or higher temperatures can shorten this time. Working time is different from gel time and full curing time.
- Approximately 2 hours
Safety information
Read the warnings and use appropriate protective equipment before handling the product.
Reviews
Frequently bought together
Useful additions for your project.