SCIGRIP SG400LSE Methacrylate Adhesive
- Suitable for PP and PE
- Short working and fixture time
- Non-sag
SCIGRIP SG400LSE is a high quality two-component methyl methacrylate adhesive specifically designed for bonding materials with low surface energy, such as polypropylene (PP) and polyethylene (PE). These surfaces are notoriously difficult to bond, but with this translucent methacrylate adhesive that is no problem at all. The adhesive comes in a handy 50 ml cartridge with a 10:1 mixing ratio. SCIGRIP SG400LSE is non sagging and has short fixture times, making it an excellent choice for assembly and other fabrication or manufacturing uses.
Benefits SCIGRIP SG400LSE
- Suitable for bonding PP and PE.
- No surface preparation.
- Translucent. Semi-clear when dry.
- Short working and fixture time (1-3 minutes).
- Non-sag application.
- Very high strength (substrates break before the adhesive does).
Applications
SCIGRIP SG400LSE is suitable for bonding to and of the following materials:
- Polypropylene (PP)
- ABS
- Acrylic
- Nylon
- LDPE
- Stainless steel
Product properties
Type: SG400LSE
Colour: translucent
Mix ratio/volume: 10:1
Working time: 1-3 minutes
Fixture time: 6 hours
Packaging: 50 ml (cartridge)
Application gun: application gun LS50-2
Mixing tube: mixing tube B
Shelf life: 6 months
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
