Tec7 Glue, Mount and Seal 400 ml (sausage)

  • New packaging (sausage)
  • Strong 1-component kit
  • For bonding and sealing

New in our product range: Tec7 adhesive sealant in a sausage cartridge instead of a sealant tube. By using sausage cartridges for your gluing, assembly and sealant jobs instead of hard plastic tubes, you produce over 90% less waste in volume and significantly reduce CO2 emissions during transport. So the same high-quality properties, only in environmentally conscious packaging!

Read more about the transition from sealant tubes to sausages here here.

About Tec7 Glue, Mount and Seal

Tec7 is a 1-component adhesive sealant suitable for bonding, mounting and sealing. The elastic polymer sealant offers excellent adhesion to various materials and has a very high final strength. This makes this adhesive sealant the first choice for very many applications where high final strength and fast curing are desired. The polymer sealant is suitable for indoor and outdoor use and can also be used for underwater bonding.

Tec7 adhesive sealant easily replaces assembly adhesive, wood adhesive, PU adhesive, silicone sealant, sanitary silicone sealant, acrylic sealant and butylene sealant.

Tip: looking for an adhesive sealant in a different colour? Then order Tec7 Glue, Mount and Seal (cartridge) or Tec7 Trans Clear (transparent).

Benefits of Tec7 Glue, Mount and Seal

  • Excellent adhesion (also on wet surfaces).
  • After curing, super strong and permanently elastic.
  • High UV and fungus resistance.
  • Water and airtight.
  • Almost odourless (free of phthalates, solvents and isocyanates).


Always apply the sealing adhesive to a clean, dust and grease-free substrate. If necessary clean the surface with Tec7 Cleaner. You can easily apply the adhesive with Tec7 Omnigun at a temperature of minimum 5°C and maximum 40°C. The ideal glue thickness for optimal strength is 3 mm. After approximately 25 minutes (at 23°C) the adhesive is tack-free and after at least 24 hours it is cured.

We advise to test the adhesion to plastics, powder coatings, exotic wood and bituminous materials. When gluing mirrors in sanitary facilities, only apply vertical strips of adhesive to avoid stagnant moisture due to condensation.

Applications Tec7 Glue, Mount and Seal

Tec7 Glue, Mount and Seal is very versatile and suitable for a wide range of applications.

  • Suitable for all applications in the construction and sanitary sectors and general maintenance. Tec7 replaces mounting, wood and PU adhesive, silicone sealant, sanitary silicone sealant, acrylate adhesive and butyl caulking. 
  • As a universal adhesive, Tec7 adheres to most substrates and does not attack synthetic materials.
  • Also suitable for mirrors, natural stone (does not bleed through), metal, polyester, polystyrene foam and moist substrates, even under water.
  • Overpaintable with most common paints.
  • Lower adhesion on PP, PE bitumen and silicones.

This polymer sealant is very suitable for bonding vibrating constructions in the metal, container, wagon, ship, caravan and coachbuilding industry. In addition, you can use this product for bonding and sealing natural stone and mirrors. Joints and construction seams in wet areas can also be easily sealed using Tec7 Glue, Mount and Seal. Furthermore, this sealing adhesive is also used for sealing countertops and sinks and for bonding facade panels, window sills and tiles.


Colour: white
Contents: 310 ml (sausage cartridge)
Basis: MS-polymer
Skin time: after 8 minutes (23°C)
Tack-free: after 25 minutes (23°C)
Full hardening:

  • 24 hours: 6 mm
  • 48 hours: 7 mm
  • 72 hours: 8 mm

Elongation at break: 350%
Chemical resistance: water, seawater, aliphatic solvents, oils, greases, dilute organic acids, lyes
Adhesion: excellent on polyester, epoxy, stone, concrete, mortar, glass, mirrors, metal, anodised or lacquered aluminum, galvanised steel, copper, brass, (hard) PVC, natural stone, wood etc.
Application: Tec7 Omnigun

For more technical properties, check out the Tec7 Glue, Mount and Seal technical datasheet.




We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.

Product Choices

15,99 15,99
Colour Price

Receive a back in stock email.

  • Extensive range!
  • PayPal, Mastercard, Visa, American Express
  • Fast reliable delivery in Europe (1-5 days)
  • Free advice from a specialist!
Product advisor

We will be happy to give you advice!