Mould resin

Non-shrink
Builds up thickness quickly
Laminating up to 6 mm in one go

Would you like to make your own mould? This vinylester resin is especially designed for making polyester moulds. This rmould making resin is easy to process and produces good results. With this resin polyester moulds can be made very quickly. The resin is heat resistant and shrink free.

With this mould resin you can add 4 layers of chopped strand mat 450 gr/m² at once, so you can quickly make your mould and start producing. As a rule a mould can be built in 2 days (1^st day gelcoat and vinylester resin, 2^nd day mould resin)

Benefits of vinylester mould resin

Minimal shrinkage.
Fast curing, which significantly shortens the construction time of a mould.
Equipped with a colour indicator for curing.
Low styrene emission, dries tack-free.
Excellent fiberglass wetting.

Product properties

Packaging: 1 kg, 5 kg, 25 kg
Density: approx. 1.4 g/cm³
Gel time: approx. 20 minutes
Fully cured: after approx. 2 hours
Shelf life: at least 6 months, if not mixed, in original packaging in a cool and frost free place
Hardener: cures with standard hardener

Below you will find an overview of the required amount hardener per amount of mould building resin:

Mould resin	Hardener
1 kg	10 ml hardener
5 kg	50 ml hardener
25 kg	250 ml hardener

Tip: please check our technical documentation for all technical properties and information on using mould resin.

We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.

Safety equipment

Gevaar

Code	Description
H226	Flammable liquid and vapour.
H315	Causes skin irritation.
H319	Causes serious eye irritation.
H335	May cause respiratory irritation.
H361	Suspected of damaging fertility or the unborn child <state specific effect if known> <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
H372	Causes damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>.
H412	Harmful to aquatic life with long lasting effects.
P101	If medical advice is needed, have product container or label at hand.
P102	Keep out of reach of children.
P201	Obtain special instructions before use.
P202	Do not handle until all safety precautions have been read and understood.
P210	Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P233	Keep container tightly closed.
P235	Keep cool.
P240	Ground and bond container and receiving equipment.
P241	Use explosion-proof [electrical/ventilating/lighting/…] equipment.
P243	Take action to prevent static discharges.
P260	Do not breathe dust/fume/gas/mist/vapours/spray.
P264	Wash ... thoroughly after handling.
P270	Do no eat, drink or smoke when using this product.
P271	Use only outdoors or in a well-ventilated area.
P280	Wear protective gloves/protective clothing/eye protection/face protection.
P312	Call a POISON CENTER/doctor/… if you feel unwell.
P314	Get medical advice/attention if you feel unwell.
P302+P352	IF ON SKIN: Wash with plenty of water/…
P303+P361+P353	IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P304+P340	IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305+P351+P338	IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308+P313	IF exposed or concerned: Get medical advice/attention.
P332+P313	If skin irritation occurs: Get medical advice/attention.
P337+P313	If eye irritation persists: Get medical advice/attention.
P501B	Dispose of contents / container in accordance with local, regional or international regulations