Release agent for silicone
- Vaseline-based
- Simplifies unloading
- Colourless
Simplify unloading epoxy resins in silicone and extend the life of silicone molds with this universal release spray. This release agent is ideal for making 2-part molds.
Spray the surfaces to be loosened with this release agent and distribute it with a brush or paintbrush. You can repeat this operation if necessary. The silicone will now not stick to your work and will easily come loose.
Benefits of release agent for silicone
- Extends the life of silicone moulds.
- Simplifies unloading.
- Spray on Vaseline basis.
Instructions for use
The release agent is easy to use. Shake the release spray well before use and hold the spray can at a distance of 20 to 30 cm. Spray evenly onto the surface and spread it with a brush or paintbrush. The silicone will now not stick to your work and will come off easily. We recommend processing this product at room temperature.
Please note: release agent can result in a dull mould surface, which means the end result is less high-gloss. Are you pouring epoxy into the mould? Then you can of course polish the end result again.
Properties
Suitable for: silicone, polyurethane, epoxy, polyester
Packaging: aerosol 400 grams
Consumption: approx. 25-50 gr/m2
Curing time: approx. 15 minutes
Colour: transparent
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
