Mirka Pad Saver (100 x 152 x 152 mm (delta))
At a glance
- Prevents premature wear
- Protects the backing pad
- Hook-and-loop fastening
The Mirka Pad Saver 100 x 152 x 152 mm (delta) is a protective pad that fits between the backing pad and the sanding disc. It protects the hook-and-loop surface of the backing pad from wear, especially when sanding intensively with net abrasives such as Mirka Abranet Ace. This helps extend the service life of the more expensive backing pad.
This Pad Saver is suitable for Mirka DEOS delta sanders. You can also use it on sanders from other brands, provided the size and hole pattern match the backing pad. Mirka Pad Savers are available in various sizes and hole patterns.
Benefits of a Pad Saver
- Protects the backing pad against premature wear.
- Suitable for intensive sanding with net abrasives.
- Easy to fit between the backing pad and sanding disc.
- Hook-and-loop attachment.
- Inexpensive to replace when worn.
Specifications
Packaging: per piece
Dimensions: 100 x 152 x 152 mm (delta)
Hole pattern: 32
Attachment: hook-and-loop
Other Mirka Pad Savers
Mirka Pad Savers are available in various sizes and hole patterns. Choose the version that matches the backing pad on your sander.
| Size | Hole pattern | Compatible sanders |
| Ø77 mm | 6 | Mirka DEROS II 350 & 325 |
| Ø125 mm | 33 | Mirka DEROS II 550 |
| Ø150 mm | 67 | Mirka DEROS II 625, 650 & 680 |
| 81 x 133 mm | 54 | Mirka DEOS II 353 |
| 70 x 198 mm | 56 | Mirka DEOS II 383 |
| 100 x 152 x 152 mm | 32 | Mirka DEOS II 663 |
Product properties
The key technical properties clearly listed in one place.
- Article number
- SCH002381
-
The number of individual products or parts supplied in one set. A set may contain several identical items or a mixture of components; check the package contents for exactly what is included.
- 1 piece
-
The product's dimensions, usually shown as length × width × height or another product-specific order. Check whether the measurements describe the outside, inside or usable space, especially for containers and moulds.
- 100 x 152 x 152 mm
-
How an accessory or material is attached, for example with hook-and-loop fastening, a threaded connection, a clamp or a self-adhesive layer. The fastening method must match the machine, tool or substrate.
- Hook and loop
-
The arrangement of extraction holes in a sanding disc or backing pad. A matching hole pattern helps remove sanding dust. Check that the holes line up with the backing pad and dust extraction system.
- 32
Reviews
Frequently bought together
Useful additions for your project.