International Toplac Plus (0.75 litre)
At a glance
- 1-component topcoat
- Available in 24 colours
- Built-in UV filter
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
Please note: this product is being discontinued and will be replaced by Epifanes Mono-urethane Yacht Paint. This yacht paint is available in any RAL colour and has long-lasting colour and gloss retention.
International Toplac Plus is a 1-component high gloss topcoat of high quality. The premium topcoat is suitable for all surfaces above the waterline. Due to the UV filters, the topcoat protects the surface for a long time against the influence of sunlight. Toplac Plus can be easily applied with a foam roller, no brush required.
Tip: use International One UP under Toplac Plus to get the best 1-component paint system that International offers!
Benefits of Toplac Plus
- Improved aesthetics compared to Toplac, with better reflection and flow.
- Built-in UV filters for long-term protection against sunlight.
- Available in a range of 24 bright colours.
- Due to the new formula, there is no need to brush the surface when using a paint roller.
- Unique chemical structure for superior finish, durability and flow.
Application
International Toplac Plus is suitable for use on hulls above the waterline on the following surfaces:
- Aluminium
- Zinc-galvanised steel
- Composite
- Cast iron
- GRP (gelcoat)
- Lead
- Steel
- Wood
- Bronze / stainless steel
Specifications
Contents: 750 ml
Finish: high gloss
Density: 1.1
Volume solids: 51%
Shelf life: 2 years
VOC content: 404 g/L
Application method: brush, foam roller
Minimum application temperature: 5°C
Recommended number of coats: 2-3
Practical coverage: 12 m2/L
Touch dry after: 3 hours (at 15°C)
Recoatable (with Toplac Plus):
- Minimum: after 16 hours (at 15°C)
- Maximum: after 3 days (at 15°C)
Product properties
The key technical properties clearly listed in one place.
- Article number
- BOO001350
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- Finish coat
-
The materials, substrates or tasks a product is intended for. A general claim such as 'suitable for plastics' does not mean it works with every type of plastic; the specific substrate and its preparation still matter.
- Polyester boten, Stalen-boten, Aluminium boten, Houten boten
-
The recommended number of coats needed to achieve the intended coverage, thickness or protection. Highly absorbent substrates or different application methods may require additional coats. Allow for the specified time between coats.
- 2-3 coats
-
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
- 24 months
-
The time until the surface no longer feels tacky to a light touch. The material underneath may still be soft, so tack-free does not mean fully cured or ready for heavy loading.
- 3 hours (15 °C)
-
Minimum application temperature is the lowest temperature at which a product may be used according to the manufacturer. The limit can apply to the air, substrate and product itself.
At lower temperatures, resins and coatings can become thicker and cure more slowly. Moisture can also condense on a cold substrate and reduce adhesion. Check the dew point and measure the surface temperature before starting. A longer drying time does not automatically make application below the specified minimum acceptable.
- 5 °C
-
Solids content is the proportion of material remaining after volatile components have evaporated from a coating. It is stated as a percentage by weight or by volume (%); these are not interchangeable. Volume solids content helps estimate dry film thickness: with 60% volume solids, a 100 µm wet film will theoretically produce approximately 60 µm of dry film.
- Approximately: 51%
-
Consumption or coverage describes how much product is needed for a given surface area. Consumption may be stated in g/m² or kg/m², while coverage is often given in m²/L or m²/kg. A consumption of 0.2 kg/m² means a theoretical 200 grams per square metre. Actual use depends on film thickness, substrate absorbency, application method and waste.
- Practical: 12 m²/L
-
A specific thinner that can be used, where permitted, to adjust a product's application properties or viscosity. The correct thinner and maximum quantity depend on the product. Incorrect thinning can affect coverage, drying and curing.
- Thinner No.1
- Net contents
- 750 ml
-
The application or processing methods specified by the manufacturer, such as brushing, rolling, spraying, casting or hand laminating. The chosen method can affect consumption, layer thickness and finish.
- Brush, Foam roller
-
VOC content (volatile organic compounds) indicates the amount of these substances in a product, usually expressed in g/L (grams per litre). They may evaporate during application and drying. The value describes the composition, but actual exposure also depends on how much is used, ventilation and the application method.
- 404 g/L
Reviews
Frequently bought together
Useful additions for your project.
Often chosen
