Cruiser One Antifouling

International Cruiser One is a self-sharpening antifouling suitable for use in fresh and brackish water areas. Cruiser One is copper-based and suitable for sail and motorboats (up to 25 knots). This product is ideally suited for polyester (gelcoat), wood and steel. This self-sharpening, copper-based antifouling prevents the growth of algae, pox and other organisms. Due to its self-sharpening properties, any fouling organisms are quickly removed. The antifouling is suitable for both fresh and salt/brackish water.

In many cases, it is possible to apply Cruiser One antifouling over your old system. Read more about this in the technical documentation. Does your old system consist of many (unknown) layers of antifouling? Then we advise you to remove it first with a vacuim scraper or a Tercoo rotating blaster with dust cap and spacer.

Benefits of Cruiser One Antifouling

• Suitable for sailing and motorboats (up to 25 knots).
• Extremely suitable for polyester (gelocat), wood and steel.
• Can be applied up to 6 months before launching.
• Builds up little layer thickness (self-sharpening antifouling).

Specifications

Colours: red, black, navy, off-white (please note: off-white only available in 0.75 litre)
Packaging: 0.75 litre and 5 litres
Suitable for: boats up to 25 knots (46 km/h)
Application method: roller or brush
Specific density: 1.44
VOC: 476 g/ltr
Tack-free after: 30 minutes (at 23°C)
Water immersion after: 8 hours (at 23°C)
Coverage:

• approx. 6,5 m² for 0.75 litre
• approx. 45 m² for 5 litres

Pretreatment polyester: Gelshield 200 or Primocon
Pretreatment wood: Primocon, Interprotect or HB Coating
Pretreatment metal: Primocon, Interprotect or ZF Primer