IJmopox HB Coating (RAL colours)
- 2-component epoxy coating
- Available in RAL colours
- Protects against osmosis
IJmopox HB coating is a high solid two component buildcoat for general purposes based on epoxy resins and a polyamide hardener. This coating is often used as a primer for further finishing with DD Paint High Gloss or DD Paint Silk Gloss. Recommended for osmosis repair and osmosis prevention systems.
HB Coating in RAL colours
Normally HB Coating is available in a white, black or grey base colour. However, at Polyestershoppen we can custom make HB Coating from 4 litres in any desired RAL, Sikkens or NCS colour. By choosing the coating in a colour, you have better coverage for applying topcoat. This means you need fewer layers for a good and covering result. This can save a lot of money and energy for large jobs!
Benefits of IJmopox HB Coating
- Available in all RAL colours.
- Offers protection against corrosion (steel) and osmosis (GRP).
- Excellent resistance to various chemicals and (sea) water.
- Can be painted over directly with most types of antifouling.
- Low in solvents.
- Easy to apply.
Instructions for use
Follow the instructions below to apply the epoxy coating correctly:
- Clean, sand and degrease the surface.
- Wipe the surface with a tack cloth to remove the last dust.
- Stir the base component and weigh the desired amount into a clean mixing cup.
- Add the hardener in the correct ratio to the base.
- Stir the mixture well.
- Thin the coating according to your wishes and application with approximately 5% IJmopox thinner.
- Apply HB coating evenly to the surface with a brush or velour roller. Roll the surface immediately, without pressing hard.
Product properties
Colour: RAL, NCS, Sikkens, etc.
Contents: 4L and 20L (base + hardener)
Mixing ratio (weight): 83:17
Mixing ratio (volume): 75:25
Processing temperature: 5 - 25°C
Processing time: 5 hours (20°C)
Dust dry after: 2 hours
Can be painted over after: 8 hours
Application: brush, roller of spray
Thinner: IJmopox thinner (5-10%)
Consumption: approx. 7m2 per litre
Shelf life:separate components, stored cool and dry in original packaging, minimum 12 months
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
De IJssel HB Coating | 3L | RAL 1000 groenbeige
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H226 | Flammable liquid and vapour. |
| H315 | Causes skin irritation. |
| H317 | May cause an allergic skin reaction. |
| H318 | Causes serious eye damage. |
| H319 | Causes serious eye irritation. |
| H411 | Toxic to aquatic life with long lasting effects. |
| H373A | May cause damage to organs through prolonged or repeated exposure. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P103 | Read label before use. |
| P210 | Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. |
| P260 | Do not breathe dust/fume/gas/mist/vapours/spray. |
| P261 | Avoid breathing dust/fume/gas/mist/vapours/spray. |
| P264 | Wash hands thoroughly after handling. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P310 | Immediately call a POISON CENTER/doctor/… |
| P302+P352 | IF ON SKIN: Wash with plenty of water/… |
| P303+P361+P353 | IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. |
| P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| P333+P313 | If skin irritation or rash occurs: Get medical advice/attention. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
| EUH205 | Contains epoxy constituents. May produce an allergic reaction. |
| EUH211 | Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. |
