Araldite 4858 Epoxy Adhesive
- Very strong epoxy adhesive
- Long processing time
- In handy double syringe
Araldite AW4858/HW4858 is a 2-component epoxy adhesive with very high bond strength and rigidity. This Araldite adhesive also has a long processing time and a very good resistance to condensation and water.
Features Araldite 4858 Epoxy Adhesive
- Very high shear and peel strength.
- Bonds a wide variety of materials (metal, composite and thermoplastics).
- Extremely tough and resilient adhesive.
- Long processing time.
- Very good resistance against condensation and water.
Araldite 4858 is suitable for bonding the following materials:
- Composites such as GRP/CFRP
- A wide range of substrates such as aluminum, copper, zinc and galvanised products.
- Ferrous metals.
Specific gravity: 1.1 g/cm3
Shear strength: 37 N/mm2
Processing time: 150 min
Peel strength: 6 N/mm
Temperature resistance: -60°C to +90°C
Minimum curing time for initial strength: 6 hours for 1 N/mm2 on aluminum at 23°C
- 50 ml double cartridge (application gun and mixing tubes required)
- 380 ml double cartridge (application gun and mixing tubes required)
In combination with the right application gun and suitable mixing tubes you can use Araldite 4858 instantly!
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
|H314||Causes severe skin burns and eye damage.|
|H315||Causes skin irritation.|
|H317||May cause an allergic skin reaction.|
|H319||Causes serious eye irritation.|
|H411||Toxic to aquatic life with long lasting effects.|
|P261||Avoid breathing dust/fume/gas/mist/vapours/spray.|
|P273||Avoid release to the environment.|
|P280||Wear protective gloves/protective clothing/eye protection/face protection.|
|P310||Immediately call a POISON CENTER/doctor/…|
|P302+P352||IF ON SKIN: Wash with plenty of water/…|
|P303+P361+P353||IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].|
|P305+P351+P338||IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.|
|P333+P313||If skin irritation or rash occurs: Get medical advice/attention.|
|P362+P364||Take off contaminated clothing and wash it before reuse.|
|P405||Store locked up.|
|P501B||Dispose of contents / container in accordance with local, regional or international regulations|
|EUH205||Contains epoxy constituents. May produce an allergic reaction.|