Tec7 PUR insulating and mounting foam 1K
- Ready for use
- Low expansion pressure
- Rot resistant
Ready-to-use PUR foam for sealing, bonding, filling, insulation, prevention of thermal bridges or draughts. Tec7 PUR foam produces an even foam and can be used in all positions. Is sometimes used against mouse intrusion.
Features Tec7 PUR insulating and mounting foam
- Rot resistant.
- Long shelf life, even when opened.
- 360° applicable.
- Minimal expansion pressure.
- Can be used from -10°C to +30°C.
Instructions for use
- Shake well before use (if used upside down, shake can during application to ensure smooth flow).
- Protect adjacent surfaces.
- Apply the PUR foam onto a clean and stable substrate.
- Lightly moisten the substrate to promote adherence and speed up curing.
- Allow PUR foam to reach room temperature before use.
- It is possible to keep an opened can for a few weeks if PU foam is used to seal from the nozzle.
- Clean freshly spilled PUR with PUR Cleaner.
- Clean hands with Powerwipes.
- Remove cured foam residue with Remove All.
- Store upright and clamp down during transport.
Properties
Packaging: 750 ml (aerosol)
Raw materials: polyurethane
Curing time: 90 minutes (for 30 mm thickness)
Product processing temperature: minimum +5°C
Substrate processing temperature: -10°C to +30°C
Temperature range after curing: -40°C to +90°C
Skin formation (FEICA TM 1014): 8 minutes
Can be cut (FEICA TM 1005): 45 minutes
Shelf life: 18 months in unopened packaging, kept in a cool, dry place at 20°C and in the upright position
For other properties, check the Tec7 PUR foam technical documentation.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
Safety equipment
Gevaar
Code | Description |
---|---|
H222 | Extremely flammable aerosol. |
H229 | Pressurised container: May burst if heated. |
H315 | Causes skin irritation. |
H317 | May cause an allergic skin reaction. |
H319 | Causes serious eye irritation. |
H332 | Harmful if inhaled. |
H334 | May cause allergy or asthma symptoms or breathing difficulties if inhaled. |
H335 | May cause respiratory irritation. |
H373A | May cause damage to organs through prolonged or repeated exposure. |
H351A | Suspected of causing cancer. |
P101 | If medical advice is needed, have product container or label at hand. |
P102 | Keep out of reach of children. |
P210 | Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. |
P211 | Do not spray on an open flame or other ignition source. |
P251 | Do not pierce or burn, even after use. |
P308+P313 | IF exposed or concerned: Get medical advice/attention. |
P405 | Store locked up. |
P410+P412 | Protect from sunlight. Do no expose to temperatures exceeding 50°C/ 122°F. |
P501B | Dispose of contents/container in accordance with in accordance with local regulation |
MDI | As from 24 August 2023 adequate training is required before industrial or professional use |