Silicone moulds of Sacred symbols 50 mm
- Sacred symbols mould
- Material: addition sillicones
- Dimensions: 50mm x 9mm
Silicone moulds of various holy symbols, such as Ganesha, Om and Torus. The diameter of the moulds is 50 mm. The moulds are made of silicone (Shore 33) that gives the moulds sufficient stability but still allows easy release. The silicone is an addition silicone for extra strength and chemical resistance.
Release agent spray can simplify removing the cast from the mould and can extend mould life.
Epoxy resin and pigment
By pouring an epoxy resin into the mould, you can create your own sacred geometry. The most suitable resins are RESION UV Resin Art Epoxy LV (low viscosity) or RESION UV Resin Art Epoxy MV (medium viscosity).
These resins are suitable to be combined with pigments such as RESION MetalTint, RESION TransTint, Resi-Metal or Resi-Tint.
Properties
Shape: various sacred symbols
Material: silicon addition
Hardness: Shore 33
Suitable for: Epoxy, Polyester, Polyurethane
Dimensions
- Diameter: 50 mm
- Height: 9 mm
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
