Mini torch gas burner
- Removes air bubbles easily
- Safe and easy to use
- Refillable with butane gas
Air bubbles in your epoxy are a thing of the past with this mini gas burner! The gas burner is safe to use and has an ergonomic design, making it pleasant to use. The mini torch has an adjustable flame and a long burn time, so you can use the burner for 30 minutes at a time. Is the gas burner empty? No problem, you can easily refill it with lighter refills.
The Mini torch gas burner comes in a sturdy box with accompanying manual.
Benefits of the mini gas burner
- Safe and ergonomic design
- Adjustable flame (up to 1300°C)
- Easy to refill
- One-click ignition
- Large gas capacity
How to remove air bubbles from epoxy
Do you suffer from air bubbles in your resin artworks? With this mini gas burner, you can easily remove the air bubbles. You can easily vent the epoxy on the following by stroking the surface with the mini gas burner. Make sure you do this at an appropriate distance (around 20 cm) and don't aim the burner at the same spot for too long.
By using the gas burner too much or keeping it too close to the epoxy, you risk burning the epoxy to the mould. Also, by overusing a burner, the epoxy may get too hot, causing it to smoke or turn yellow. So be careful!
Product properties
Gas: butane
Refillable: yes
Burning time: 30 minutes
Max. temperature: 1300°C
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
