Mould geode serving tray
At a glance
- Mould for serving trays
- Dimensions: 31 x 18 cm
- Material: silicone
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
Product description
With this mould for a serving tray you can make the most beautiful geode trays for yourself or others! The mould is made of silicone so the epoxy will not stick to the mould and can be released easily. This mould can be reused.
This resin art mould is supplied without handles. You can easily order the corresponding handles and screws. The handles are easy to assemble after the epoxy has hardened. To do this, drill a hole in the epoxy. This way you make the tray complete for use!
Tip: a release agent spray makes demoulding easier and helps extend mould life. Please note that the use of a release agent may result in a matt finish on the mould.
Suitable epoxy resin
Using suitable epoxy is important for the end result of your Resin Art creations. Want to use a transparent epoxy that is ideally suited for Resin Art? Then choose, for example, RESION UV Resin Art Epoxy LV (low viscosity). This epoxy resin is highly UV-resistant and easy to use due to its 2:1 mixing ratio. For all epoxy resins, see the Epoxy category.
Use UltraCast epoxy resin to increase the heat resistance of the tray (up to 75°C). This will reduce the risk of rings caused by hot crockery.
Tip: want to remove air bubbles from your epoxy without damaging the mould? Use RESION Bubble Burst alcohol spray!
Make a unique serving tray with these pigments
With pigments you can make your own epoxy tray, completely according to your wishes. For example, give the epoxy a beautiful and luxurious metallic look with MetalTint, available in more than 30 colours. Or do you prefer a transparent colour? Then use TransTint pigment. View our entire pigment range to see which pigments suit your taste!
Specifications
Shape: serving tray
Material: silicone
Dimensions: 31 x 18 cm
You will need approximately 350 grams of epoxy for this mould.
Product properties
The key technical properties clearly listed in one place.
- Article number
- SIL001162
- Shape
- Other, Rectangle
- Material
- Silicone
- Application
- Trays & Etageres
Reviews
Frequently bought together
Useful additions for your project.
Often chosen
