Silicone Easter mould: Easter bunny keyring
At a glance
- Limited edition Easter mould
- Material: silicone
- Contents: 10 grams
Limited edition Easter mould for epoxy Easter bunny keyrings. This mould is made of silicone so you can easily remove the hardened epoxy from the mould and reuse it.
While stock lasts, so be quick!
Suitable epoxy and pigments
We recommend using RESION UV Resin Art Epoxy LV for this mould. This premium quality epoxy is UV-stabilised and has a simple 100:50 mixing ratio. Looking for fun pigments to colorize your epoxy? Then take a look at all our Resin Art pigments.
Specifications
Material: silicone
Dimensions: 7 x 3.5 cm (LxW)
For this mould you will need about 10 grams of epoxy per keyring.
Product properties
The key technical properties clearly listed in one place.
- Article number
- SIL001589
-
The physical form in which a product is supplied, such as powder, granules, sheet, roll, liquid or rod. The form affects how the product is stored, measured and processed.
- Other
-
The base material a product or part is made from, such as HDPE, aluminium, glass fibre or foam. Material choice affects weight, stiffness, chemical resistance and how the part can be worked or processed.
- Silicone
-
The tasks a product is intended for, such as laminating, casting, bonding, sealing or protecting. Products intended for the same application can differ considerably in processing, curing time and final properties.
- Keychains
- Theme
- Easter
-
The product's dimensions, usually shown as length × width × height or another product-specific order. Check whether the measurements describe the outside, inside or usable space, especially for containers and moulds.
- 7 x 3.5 cm