- Mould for serving boards
- Contents: 420 grams
- Dimensions: 33 x 20 cm
Use this silicone mould to present your snacks on a homemade epoxy serving board. A homemade serving board is fun to use yourself but is also super cool to give as a gift! The large serving board mould is made of flexible silicone. This means the epoxy does not stick to the mould and you can use the mould several times.
Suitable epoxy resin
Using suitable epoxy is important for the end result of your epoxy serving board. Want to use a transparent epoxy that is ideally suited for Resin Art? Then choose RESION UV Resin Art Epoxy LV (low viscosity), for example. This epoxy resin is highly UV-resistant and easy to use due to its 2:1 mixing ratio. For all epoxy resins, see the Epoxy category. Don't forget to finish your serving board with food-safe epoxy if you use the board to put unpackaged food on.
Make a unique serving board with these pigments
Pigments can be used to make your epoxy serving board exactly as you want it. For example, you can give a beautiful and luxurious metallic look to the epoxy with MetalTint, available in more than 30 colours. Do you prefer a transparent colour? Juist use TransTint pigment. For an opaque colour, we recommend using Resi-Tint MAX. Check out our entire pigment range to see which pigments match your creative ideas!
Dimensions: 33 x 20 x 1.5 cm (lxwxd)
This mould holds approximately 420 grams of epoxy.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.