Epoxy scraping layer for floorsystems
- Evens the surface
- For a liquid proof floor
- For a tight floor finish
With RESION Epoxy Scraping Layer (EP Scratch Coat) you can easily smooth and fill floors. This scratch coat has a low viscosity, which ensures easy processing. Thanks to the light filling properties, small holes and cracks are immediately leveled.
Epoxy scratch coat is often used for non-troweled concrete floors. In addition, a scratch coat is often applied to floors that require high mechanical resistance, such as in sheds and warehouses.
After applying the scratch coat, you can finish the floor with an epoxy floor coating, epoxy cast floor or PU cast floor.
Benefits of an epoxy scraping layer
- Levels the subfloor.
- Makes the floor fluid-tight.
- Higher mechanical resistance.
- Higher chemical resistance.
- Gives a smooth floor finish.
Instructions for use
- First apply a suitable epoxy floor primer a and allow to cure for 24 hours.
- Pour the hardener of the epoxy scraper into the canister base.
- Mix for at least 3 minutes using a spiral mixer on a cordless drill. Scrape well along the bottom and edges of the tin.
- Pour the entire mixture along the edges directly onto the floor for the longest possible application time.
- Spread the epoxy scraping coat with a floor squeegee and scrape the mass over the floor.
- Allow to cure for at least 24 hours before continuing with the floor system of your choice.
Product properties
| Number of m2 | Basis (FS401) | Hardener (FS411) | |
| 10 kg | 5-8 m2 | 8.6 kg | 1.4 kg |
Packaging: base (can), hardener (jerrycan)
Consumption: 1 kg to 3 kg per m2
Application time: approx. 30 minutes
Mixing ratio: 1 kg compontent A + 166 grams component B
Processing: with a trowel or a floor squeegee.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
RESION | EP Scratch Coat Base | 8,6 kg
Safety equipment
Waarschuwing
| Code | Description |
|---|---|
| H315 | Causes skin irritation. |
| H317 | May cause an allergic skin reaction. |
| H319 | Causes serious eye irritation. |
| H411 | Toxic to aquatic life with long lasting effects. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P261 | Avoid breathing dust/fume/gas/mist/vapours/spray. |
| P264 | Wash hands thoroughly after handling. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P302+P352 | IF ON SKIN: Wash with plenty of water/… |
| P333+P313 | If skin irritation or rash occurs: Get medical advice/attention. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
| EUH205 | Contains epoxy constituents. May produce an allergic reaction. |
RESION | EP Scratch Coat Hardener | 1,4kg
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H314 | Causes severe skin burns and eye damage. |
| H317 | May cause an allergic skin reaction. |
| H302+H332 | Harmful if swallowed or if inhaled. |
| H412 | Harmful to aquatic life with long lasting effects. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P260 | Do not breathe dust/fume/gas/mist/vapours/spray. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P303+P361+P353 | IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. |
| P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| P405 | Store locked up. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
