Epoxy scraping layer for floorsystems

Epoxy scraping layer for floorsystems
Epoxy scratch coat base (8,6kg)
Epoxy scratch coat hardener (1,4kg)
Epoxy scraping layer for floorsystems
Epoxy scratch coat base (8,6kg)
Epoxy scratch coat hardener (1,4kg)
  • Evens the subsurface
  • For a liquid proof floor
  • For a tight floor finish

Are you making a floor where a smooth finish is required? Then use RESION epoxy scraping layer to level your floor. This levelling epoxy is suitable for floors finished with epoxy floor coating or epoxy cast floor. The RESION epoxy scraping layer ensures that small irregularities in a cement screed are filled and that the floor is straight again.

An epoxy scraping layer is often used on floors where a smooth finish is required, such as living rooms and bathrooms. RESION epoxy scraping layer is also used on floors where high mechanical resistance is required, such as warehouse floors.

Benefits of epoxy scratch coat

  • Levels the subfloor.
  • Makes the floor fluid-tight.
  • Higher mechanical resistance.
  • Higher chemical resistance.
  • Gives a smooth floor finish.

We recommend using an appropriate primer

Instructions for use

  • First apply a suitable epoxy floor primer a and allow to cure for 24 hours.
  • Pour the hardener of the epoxy scraper into the canister base.
  • Mix for at least 3 minutes using a spiral mixer on a cordless drill. Scrape well along the bottom and edges of the tin.
  • Pour the entire mixture along the edges directly onto the floor for the longest possible application time.
  • Spread the epoxy scraping coat with a floor squeegee and scrape the mass over the floor.
  • Allow to cure for at least 24 hours before continuing with the floor system of your choice.

Product properties

Packaging: 10.5 kg (approx. 5-8m2), 2 component: 9 kg base (tin) / 1.5 kg hardener (bottle)
Consumption: 1 kg to 3 kg per m2
Application time: approx. 30 minutes
Mixing ratio: 1 kg compontent A + 166 grams component B
Processing: with a trowel or a floor squeegee.

We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.

RESION | EP Scratch Coat Base | 8,6 kg

Safety equipment

Waarschuwing

Code Description
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P264 Wash hands thoroughly after handling.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water/…
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P501B Dispose of contents/container in accordance with in accordance with local regulation
EUH205 Contains epoxy constituents. May produce an allergic reaction.

RESION | EP Scratch Coat Hardener | 1,4kg

Safety equipment

Gevaar

Code Description
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H302+H332 Harmful if swallowed or if inhaled.
H412 Harmful to aquatic life with long lasting effects.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501B Dispose of contents/container in accordance with in accordance with local regulation

Product Choices

RESION
134,99 134,99
Contents Price
pieces

Receive a back in stock email.

  • Extensive range!
  • PayPal, Mastercard, Visa, American Express
  • Fast reliable delivery in Europe (1-5 days)
  • Free advice from a specialist!
Product advisor

We will be happy to give you advice!

Volume related prices

You order Your price You save
2 Pieces € 128,24 € 13,50
3 Pieces € 124,87 € 30,36
4 Pieces € 121,49 € 54,00
6 Pieces € 114,74 € 121,50
8 Pieces € 107,99 € 216,00