Spike roller for cast floors
- Specially for epoxy screeds
- Pins vent the resin
- Available in 18 or 40 cm
This spike roller is suitable for venting an epoxy cast floor, polyurethane cast floor or for venting floor coatings, for example. The use of a spike roller is indispensable when laying a cast floor. By rolling over the screed that has already been applied, you can easily remove air bubbles from the surface. This way, you will achieve a tight and smooth end result!
The spike roller is available in 2 sizes and has a cutting length of 11 mm. The roller is supplied including bracket, so that you can use it directly on your cast floor or coating.
Sizes
Width: 18 or 40 cm
Length of the spikes: 11 mm
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
