RESION Epoxy floor coating

View reviews

At a glance

Suitable for heavy loads
For warehouses, garages, etc.
Layer thickness: 0.5 mm

Personal product advice

Our product specialists are happy to help.

+3185 0220090 WhatsApp

Fast delivery throughout Europe

Secure payment with PayPal, Mastercard, Visa and more

4.7 out of 5 stars on Trusted Shops

Area in m²

m²

Substrate

Complete all fields with valid values. Use a comma or point for decimals and whole numbers of 1 or more for layers.

Please note: This is the total floor coating quantity for the selected substrate, including hardener (A+B). Primer, levelling compound and finishing coats are not included. Allow for application losses and follow the product instructions for your application and substrate.

Product description

Would you like to apply an epoxy floor coating to your garage, shed or industrial floor? RESION's seamless epoxy floor coating provides a sleek appearance and optimal protection for your industrial floor. RESION Epoxy floor coating is available in virtually every RAL colour and is easy to apply. At Polyestershoppen you will find all the raw materials and auxiliary materials you need to lay your own floor coating!

Why choose an epoxy floor coating?

An epoxy floor coating has a robust appearance, provides optimal protection for the company's floor and is also durable. A single coat of RESION floor coating produces a hard-wearing epoxy floor that is approximately 0.5 mm thick and suitable for heavy-duty use. The application of a two-coat system is therefore not necessary. The floor is scratch and impact resistant, and is highly resistant to acids and chemicals.

Benefits of an Epoxy floor coating:

Durable.
Suitable for heavy loads.
Scratch- and impact-resistant.
Resistant to acids and chemicals.
Available in almost every RAL colour.

How to apply an epoxy floor coating

Applying an epoxy floor coating is not complicated and is also easy to do for a do-it-yourselfer! You can easily apply an epoxy floor coating using the following steps. Watch the video below in which Arne shows you how easy it is to apply an epoxy floor coating.

First of all, make sure that the concrete surface is free from dirt and dust.
Apply the appropriate floor primer with a fleece roller and allow it to cure for approximately 24 hours.
Mix the pigment paste with floor coating component A and add the hardener. Mix thoroughly for at least 5 minutes using a spiral mixer.
After the epoxy has been mixed well, it can be applied. Pour it partially over the floor and spread the resin with a fleece roller. Keep a layer thickness of 0.5 mm to 1 mm.
Allow to cure for at least 48 hours before walking on it. After 72 hours the floor can be heavily used.
You can finish the floor coating with a matte floor finish (recommended).

Please note: let the epoxy floor coating harden for at least 7 days (at 20°C) before you wet the floor!

Specifications

Packaging	Basis (FS302)	Hardener (FS312)	Pigment (EP901)
3,75 kg (4-6 m²)	2.78 kg	675 grams	300 grams
11 kg (15-20 m²)	8.22 kg	2 kg	880 grams
25 kg (33-50 m²)	18.5 kg	4.5 kg	2 kg

Mixing ratio: 74:8:18 based on weight (floor coating base, pigment paste and hardener)
Minimum processing temperature: 6 ℃
Consumption on a levelled floor: 500 gr/m²Consumption on rough concrete/cement: 750 gr/m²
Layer thickness: 0.5 mm per applied layer
Processing time: 35 minutes (at 20°C)
Surface structure: roller structure

Tip: don't have all the materials you need at home yet? Just order the auxiliary materials package for epoxy floor coating!

More information

At Polyestershoppen.com you can easily order all materials for an epoxy floor coating. If you order before 5:00 PM CET (Central European Time), your order will be shipped the same day!

Do you have any questions about floor construction or repair? We are experts in epoxy and epoxy flooring and are happy to advise you. View the frequently asked questions in our information centre or call one of our specialists free of charge on +3185 0220090.

Product properties

The key technical properties clearly listed in one place.

Article number: VLO000317
: Epoxy
: 0.5 mm per applied coat
: 74:18:8 (by weight; base:hardener:pigment paste)
: 6 °C
: Roller texture
Net contents: 11 kg, 25 kg, 3.75 kg
: Approximately 35 minutes (at 20 °C)

Safety information

Read the warnings and use appropriate protective equipment before handling the product.

Epoxypigment RAL 1000 groenbeige - 300 gr

Gevaar

Recommended protective equipment

Hazard pictograms

Warnings and precautions

H315 Causes skin irritation.

H317 May cause an allergic skin reaction.

H319 Causes serious eye irritation.

H411 Toxic to aquatic life with long lasting effects.

H360F May damage fertility.

P101 If medical advice is needed, have product container or label at hand.

P102 Keep out of reach of children.

P261 Avoid breathing dust/fume/gas/mist/vapours/spray.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P308+P313 IF exposed or concerned: Get medical advice/attention.

P333+P313 If skin irritation or rash occurs: Get medical advice/attention.

P405 Store locked up.

P501 Dispose of contents/container in accordance with in accordance with local regulation