EP105 | UV Clear Coat epoxy | Basis | 100 gram
UFI: XCJ0-00ST-P00P-A4FP
RESION UV Clear Coat Epoxy is a top quality UV-resistant epoxy coating. The two-component epoxy system is versatile in use, so you can use it, for example, to finish tables, tiles, kitchen tops and much more. With the 2:1 mixing ratio, the coating is easy to use and its also suitable if you have never worked with epoxy before. Partly due to its high UV resistance, Clear Coat Epoxy gives a crystal clear result!
In contrast to RESION Epoxy coating transparent, this product has a high UV resistance. RESION UV Clear Coat has a built-in UV stabiliser, which makes it highly resistant to yellowing without having to add a stabiliser yourself.
This coating is often used to pour a transparent layer over tiles, tabletops, concrete countertops, kitchen tops and countertops. Epoxy coating has good adhesion to almost all surfaces. This makes it an ideal coating on wood, concrete and stone. When applying the epoxy resin, make sure that the surface is sanded smooth. For smooth surfaces that cannot be sanded, we recommend using our RESION primer.
RESION UV Clear Coat Epoxy is easy to use. With the simple 2 to 1 (100:50) mixing ratio you can easily weigh the epoxy coating. This is how to use the UV Clear Coat Epoxy:
| Unit | Resin (EP105) | Hardener (EP132) |
| 0.75 kg | 500 grams | 250 grams |
| 1.5 kg | 1 kg | 500 grams |
| 3 kg | 2 kg | 1 kg |
| 7.5 kg | 5 kg | 2.5 kg |
| 15 kg | 10 kg | 5 kg |
| 30 kg | 20 kg | 10 kg |
| 60 kg | 40 kg | 20 kg |
The key technical properties clearly listed in one place.
UV stabilisation helps a material better withstand the effects of sunlight, including yellowing and deterioration of its properties. It slows ageing but does not make a resin or plastic completely resistant to UV exposure. The degree of protection varies by product.
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
Mixing ratio indicates how much of each component is needed, for example resin (A) and hardener (B). A ratio of 100:50 by weight means 100 grams of A to 50 grams of B; by volume you might use millilitres. Weight and volume ratios are not necessarily the same because the components may have different densities. Accurate measuring is important for proper curing.
The tasks a product is intended for, such as laminating, casting, bonding, sealing or protecting. Products intended for the same application can differ considerably in processing, curing time and final properties.
Heat resistance describes the temperature a material can withstand after correct processing and curing, usually expressed in degrees Celsius (°C). Continuous exposure is different from a brief temperature peak, and mechanical loading may also affect the limit. Heat resistance is not the same as the temperature at which the product can be applied.
Working time is the period during which a product remains workable after mixing or activation, usually given in minutes at a specified temperature, often 20 °C. With reactive resins, the chemical reaction also continues in the mixing container, and larger quantities or higher temperatures can shorten this time. Working time is different from gel time and full curing time.
At this point, the material is generally firm enough to handle carefully, move or remove from a mould. Sanding, heavier loads or extended use may require further curing.
The period for which an unopened product remains usable under the specified storage conditions. Check whether the period starts from the manufacturing date or another date. Shelf life may be shorter after opening, especially for products sensitive to air or moisture.
Minimum application temperature is the lowest temperature at which a product may be used according to the manufacturer. The limit can apply to the air, substrate and product itself.
At lower temperatures, resins and coatings can become thicker and cure more slowly. Moisture can also condense on a cold substrate and reduce adhesion. Check the dew point and measure the surface temperature before starting. A longer drying time does not automatically make application below the specified minimum acceptable.
A solvent-free product contains no added solvents according to the manufacturer's specification. This does not automatically mean it is odourless, emission-free or safe to use without protective measures.
A paint or varnish layer is dust-dry when settling dust is less likely to stick to the surface. It may not yet be touch-dry, ready for overcoating or suitable for loading; these are different stages of drying and curing.
Curing time is the period a product needs to reach a specified stage of cure. It is usually given in hours or days, often at a reference temperature such as 20 °C. A product may be tack-free or safe to handle before reaching its full mechanical and chemical resistance. Film thickness and mixed quantity may also affect the time.
Consumption or coverage describes how much product is needed for a given surface area. Consumption may be stated in g/m² or kg/m², while coverage is often given in m²/L or m²/kg. A consumption of 0.2 kg/m² means a theoretical 200 grams per square metre. Actual use depends on film thickness, substrate absorbency, application method and waste.
The application or processing methods specified by the manufacturer, such as brushing, rolling, spraying, casting or hand laminating. The chosen method can affect consumption, layer thickness and finish.
Read the warnings and use appropriate protective equipment before handling the product.
UFI: XCJ0-00ST-P00P-A4FP
Useful additions for your project.