RESION EP Colorshield wall coating

RESION EP Colorshield is a thixotropic epoxy roller coating suitable for a wide range of applications, such as boat bilges, walls in sanitary facilities or kitchens, trailers, steel structures, and more. What makes this roller coating unique is that it is the only epoxy that can be applied vertically. In addition, EP Colorshield is solvent-free and highly resistant to water, grease, oil, and various chemicals.

EP Colorshield is a good alternative to De IJssel Variopox roller coating. Before applying Colorshield, it is important to prepare the substrate properly by applying a primer to promote adhesion. For example, use primer for dry substrates or ZF Primer for metal substrates. EP Colorshield needs several coats especially with light colours to create good coverage.

Benefits of EP Colorshield epoxy roller coating 

• It is the only epoxy that can be applied vertically (very suitable as a wall coating, bathroom coating).
• Highly UV resistant and therefore very colourfast.
• Free of solvents (can therefore also be applied in spaces that are difficult to ventilate).
• Easy to apply with a roller.
• Resistant to water, oil, grease, petrol and various chemicals.
• Very durable and resistant to pressure, impact and shock loads.

Applications

 EP Colorshield is suitable for many different applications such as:

• Kitchen and bathroom walls. 
• Small floors.
• Sanitary rooms.
• Ship's planking.
• Bilges.
• Engine rooms.
• Diesel tanks and petrol tanks.
• Humid places.
• Steel staircases and constructions.
• Animal housing.

Directions for use

You can easily apply this RESION wall coating by following these steps:

• Carefully weigh the base component and hardener according to the mixing ratio on the packaging (100:25). 
• Mix the components thoroughly for 3 minutes. Pour the mixture into a clean mixing container and stir vigorously again.
• Apply EP Colorshield evenly to the substrate using a velour roller or disposable brush (the application time is 20 minutes).
• Allow the roller coating to cure for 24 hours at 20℃.
• If necessary, apply a second coat of Colorshield after sanding with 180-grit paper.
• After 2-4 days the epoxy coating is fully cured.
• Finally, finish the coating with DD paint for best colour retention. 

To carry out all the steps properly, we have put together a handy auxiliary materials package for applying Colorshield. When using light colours, we recommend applying several layers of EP Colorshield for good coverage.

Specifications

Mixing ratio: 100:25 (parts by weight)
Colour: available in all RAL colours
Gloss: high gloss
Density: approx. 1.4 g/cm³ (mixed product)
Pot life: 20 minutes (20℃)
Minimum processing temperature: 15℃
Dust dry after: approx. 4 hours
Fully cured after: approx. 2-4 days, walkable after 24 hours
Shelf life: at least 12 months (unmixed, in original packaging, stored in a cool and frost-free place)  
Yield: 

• Flat surface: 10.0 m²/L
• Textured/uneven substrate: 6.7 m²/L 

(Practical yield depends on a number of factors such as the shape of the object, the condition and profile of the surface, the method of application, the weather conditions and the skill of the applicator).

More information?

It is easy to order RESION EP Colorshield wall coating online at Polyestershoppen.com. If you order on working days before 5:00 pm CET (Central European Time), your order will be shipped the same day! Would you like more information about RESION EP Colorshield? We are happy to advise you. Please contact us by phone +31850220090, send an email to support@polyestershoppen.com or start a live chat.