Recommended
Quadraxial Glass Fabric 600 gr/m2
At a glance
- Low resin absorption
- Quasi isotropic
- Very good wetting
Fast delivery throughout Europe
Secure payment with PayPal, Mastercard, Visa and more
4.7 out of 5 stars on Trusted Shops
Product description
Quadraxial stitched glass fabric 600 gr/m2 is a high-quality, heavy-duty glass fabric. The fabric is used for building boats, surfboards, longboards, skis and many other similar applications. The resin consumption is approximately 549 gr/m2 and is suitable for laminating with epoxy resin, polyester resin and vinylester resin. After hand lay-up and curing, the quadraxial fabric provides a laminate thickness of 0.78 mm.
Quadraxial Glass Fabric 600 gr/m2 is also available in an extra heavy variant: Quadriaxial Glass Fabric 1200 gr/m2.
What is Quadraxial glass fabric?
Quadraxial glass fabric is an advanced fabric consisting of 4 layers of unidirectional fibres. The fibres are oriented as follows: one layer along the length of the roll and one across the width, and two layers at angles of +45 and -45 degrees (0/90/-45/+45). This construction ensures excellent compressive and tensile strength in all directions, making the fabric quasi-isotropic.
This structure provides excellent compressive and tensile strength. A key advantage of this fabric is that it enables lightweight yet very stiff constructions. Resin absorption is minimised due to the tight fibre alignment, resulting in a stronger, more efficient laminate.
Specifications
| Application method | Layer thickness | Resin consumption |
| Hand lay-up | 0.78 mm | approx. 549 gr/m2 |
| Wet Bagging | 0.55 mm | approx. 312 gr/m2 |
| Vacuum injection | 0.52 mm | approx. 288 gr/m2 |
Weight: 600 gr/m2
Weave type: quadraxial (0/90/+45/-45)
Width: 127 cm
Compatible with: polyester resin, vinylester resin and epoxy resin
Packaging:
- 1 lm: 127 cm x 1 lm (1.27 m2)
- 5 lm: 127 cm x 5 lm (6.35 m2)
- 20 lm: 127 cm x 20 lm (25.4 m2)
- 50 lm: 127 cm x 50 lm (63.5 m2), roll-packed
Delivery:
- 1 m2, 5 m2 and 20 m2 roll-packed in a box
- 50 metres, roll-packed and foil-wrapped
Product properties
The key technical properties clearly listed in one place.
- Article number
- GLA000455
-
The materials, substrates or tasks a product is intended for. A general claim such as 'suitable for plastics' does not mean it works with every type of plastic; the specific substrate and its preparation still matter.
- Polyester, Epoxy, Vinylester
-
Fabric or reinforcement type describes how the fibres are arranged. This affects how easily the material drapes over a shape and which directions it mainly reinforces.
- Plain weave (square weave): the yarns pass alternately over and under each other. The fabric is stable and works well on flat or gently curved surfaces.
- Twill weave: recognisable by its diagonal pattern. It is more flexible than plain weave and drapes more easily over curves.
- Unidirectional reinforcement (UD): the fibres run mainly in one direction, usually marked 0°. It provides reinforcement primarily along that direction.
- Multiaxial reinforcement: fibres are arranged in several directions, for example biaxial (+45°/-45°), Square (0°/90°) or triaxial (0°/+45°/-45°). Fibre bundles are normally held together by stitching rather than a conventional weave.
Note: a Square reinforcement (0°/90°) is not the same as a plain-woven square fabric. Also consider fibre type and areal weight (g/m²).
- Quadraxial (0°/90°/+45°/-45°)
-
The technical product category, such as primer, resin, hardener or cleaner. It explains the product's purpose and helps you find other products with a similar function.
- Glass fabric (special)
-
The measurement across a product from one side to the other, for example for rolls, panels or fabrics. With rolled materials, the usable width may differ from the overall width.
- 1.270 mm
-
The parts and accessories supplied as standard, such as a complete set of components, separate accessories or a machine with attachments. Product photographs may also show items that are not included.
- 1 m², 5 m² and 20 m² roll-packed in a box
-
Areal weight is the weight of one square metre of dry reinforcement, expressed in g/m² (grams per square metre). For example, 200 g/m² glass fabric contains 200 grams of dry fibres per m², without resin. Areal weight helps with reinforcement selection and resin consumption estimates, but it is not the final laminate thickness.
- 600 g/m²
Reviews
Frequently bought together
Useful additions for your project.
Often chosen
Often chosen
Often chosen
