RESION PU Casting Resin
- For model making and industry
- 1:1 mixing ratio
- Fast curing
RESION PU casting resin is a fast-hardening 2-component polyurethane casting resin. The resin enables excellent reproduction of details and is therefore suitable for a wide range of applications in model making and mechanical engineering.
PU casting resin from RESION is characterised by easy processing (1:1 mixing ratio), fast curing, low viscosity and high temperature resistance. This makes the polyurethane resin extremely suitable for producing moulds, replicas and prototypes. RESION polyurethane casting resin is a comparable alternative to Rencast FC52/FC53.
Features RESION PU Casting Resin
- Easy processing (1:1 mixing ratio).
- Rapid curing.
- Excellent reproduction of details.
- High temperature resistance.
-
Suitable for castings up to 10 cm thick.
Directions for use
Polyurethane casting resin is easy to use. Just follow the steps below.
- Weigh components A and B accurately using the correct mixing ratio (1:1 by weight).
- Mix the two components carefully until the mixture has a uniform color.
- Process the resin according to the intended application (processing time is approximately 7-8 minutes).
- Allow the PU resin to harden (fully cured after approximately 24 hours).
Applications
You can use this casting resin for the following applications:
- Casting models
- Art objects
- Model making
- Fishing lures
- Core boxes
- Negative moulds
- Pattern plates
- Inspection models
- Master models
-
Prototype machining test pieces
Specifications
| Packaging | Polyol (A) | Isocyanate (B) |
| 1 kg | 0.5 kg | 0.5 kg |
| 2 kg | 1 kg | 1 kg |
| 10 kg | 5 kg | 5 kg |
| 50 kg | 25 kg | 25 kg |
| 400 kg* | 200 kg | 200 kg |
Article code: PU12
Colour: ivory
Base: Ebalta SG 2000 L
Mixing ratio: 1:1 (weight)
Working time: 7-8 minutes
Demoulding time: 60-90 minutes
Viscosity: 55 mPas.
Density: 1.1 g/cm³
Heat resistance: 89°C
Hardness: Shore 72D
Shelf life: 12 months when stored in the original unopened packaging at temperatures between 18°C and 25°C.
*The 400 kg set is supplied in open steel drums. Thoroughly stir component A before use.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
RESION PU Cast | Polyol (A) | 0,5 kg
Safety equipment
Waarschuwing
| Code | Description |
|---|---|
| H319 | Causes serious eye irritation. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P264 | Wash hands thoroughly after handling. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| P337+P313 | If eye irritation persists: Get medical advice/attention. |
RESION PU Cast | Isocyanaat (B) | 0,5 kg
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H304 | May be fatal if swallowed and enters airways. |
| H315 | Causes skin irritation. |
| H317 | May cause an allergic skin reaction. |
| H319 | Causes serious eye irritation. |
| H332 | Harmful if inhaled. |
| H334 | May cause allergy or asthma symptoms or breathing difficulties if inhaled. |
| H335 | May cause respiratory irritation. |
| H410 | Very toxic to aquatic life with long lasting effects. |
| H351 | Suspected of causing cancer. |
| H373 | May cause damage to organs through prolonged or repeated exposure by inhalation. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P201 | Obtain special instructions before use. |
| P260 | Do not breathe dust/fume/gas/mist/vapours/spray. |
| P314 | Get medical advice/attention if you feel unwell. |
| P301+P310 | IF SWALLOWED: Immediately call a POISON CENTER/doctor/… |
| P405 | Store locked up. |
| P501 | Dispose of contents/container in accordance with in accordance with local regulation |
| EUH204 | Contains isocyanates. May produce an allergic reaction. |
| MDI | As from 24 August 2023 adequate training is required before industrial or professional use |
