- Mould for 14 rings
- 2 variants
- Material: silicone
With this mould you can make 14 rings in one go. The rings come in different sizes and two variants: a smooth variant (7x) and a variant with a faceted edge (7x). The mould is made of flexible silicone. This prevents the epoxy from sticking to the mould and makes it easy to remove the hardened epoxy from the mould. The mould can be used several times.
Suitable epoxy resin
The use of suitable epoxy is important for the final result of your Resin Art rings. Would you like to use a transparent epoxy that is ideally suited to Resin Art? Then choose for example RESION UV Resin Art Epoxy LV (low viscosity). This epoxy resin is highly UV resistant and easy to use thanks to its 2:1 mixing ratio. For all epoxy resins, see the category Epoxy.
Make unique rings with these pigments
With pigments, you can make your epoxy jewellery completely to your liking. For example, give your epoxy a beautiful, luxurious metallic look with MetalTint, available in more than 30 colours. Or do you prefer a transparent colour? Then use TransTint pigment. For an opaque colour use our Resi-Tint MAX pigment paste.
View our entire pigment range to see which pigments suit your taste!
Number: 14 pieces
Dimensions smallest ring: 2.8 x 1.4 cm (lxw)
Dimensions largest ring: 3.5 x 2 cm (lxw)
Depth: approx. 0.8 mm
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.