Epoxy garage floor package

  • Complete package from 10m2
  • Long lasting protection
  • Only one layer required

Do you want a beautiful epoxy floor in your garage? With the epoxy floor garage package you have everything you need to do this in one go! This complete set allows you to realise your own epoxy garage floor quick and easy.

Contents epoxy garage floor package 

You can order our packages for garage floors with a surface of 10m2, 15m2, 20m2 and 30m2. Measure the surface of the garage beforehand. The table below shows the contents of the different epoxy floor garage packages.

  Primer for dry substrates Epoxy floor coating Auxiliary materials package
10 m2 3 kg 7.5 kg  Small
15 m2 4.5 kg 11 kg Small 
20 m2 7.5 kg 14.75 kg Large
30 m2 10.5 kg 25 kg Large
Please note: the packages have been compiled on dry substrates. Not sure about the surface? Please contact us.

Gloss or matte

An epoxy floor is high-gloss as standard. Don't you want this? Then we recommend you order a silk gloss coating for epoxy floors. A silk gloss coating also provides extra protection and scratch resistance. Do you use the garage to park a car? Then choose PU AntiColor (silk gloss for garages). This garage floor coating is stronger than RESION silk gloss coating and therefore resistant to migration of car tyre rubber.

Do you work a lot in your garage? Then you might want to apply an anti-slip structure. We offer various anti-slip materials. This way your floor will always be sturdy, even when wet.

Get cracking!

Now that you know which products the package consists of, we would like to explain how to apply the epoxy floor in the garage. We have written this down step by step for you. Would you rather watch an instruction video? You will find it under the following step-by-step plan!

  • Make sure that the surface is free of dirt and dust, so always clean your garage floor thoroughly. Do you have damage or is your floor uneven? Please repair this with TEC7 Floor Fix.
  • Do you have many or large irregularites? Then consider using levelling epoxy first.
  • Apply the epoxy floor primer. Roll it out crosswise with a fleece roller and allow to cure for 20 hours.
  • Mix all components of the epoxy floor coating. These are components A, B and the pigment paste. Mix well with a spiral mixer.
  • Pour the mixed epoxy over the garage floor. Keep a small amount in a mixing cup. This can be used for the edges. Spread the floor coating with a floor squeegee so that you cover the entire garage floor. Then roll it all out crosswise with a fleece roller.
  • You can check the edges with a flat brush and use the floor coating from the mixing cup.
  • Now leave to cure for 48 hours. After 72 hours the floor can be used. Wait seven days before putting your car inside, for example.
Please note: let the epoxy floor coating harden for at least 7 days (at 20°C) before the floor is moisture proof!

This is why you will want an epoxy floor in your garage

An epoxy floor coating provides a sleek and robust appearance that really embellishes your garage floor. It is not only attractive, but also functional. A single layer of epoxy floor coating produces a wear-resistant floor that is approximately 0.5 mm thick and suitable for heavy loads. After just one coat, the floor is strong, scratch and impact resistant, as well as resistant to acids and chemicals. There are also many other benefits:

  • Fully liquid-proof, no problems with rain or snow.
  • Available in any RAL-colour.
  • Very easy to clean.
  • Safe product to work with.
  • Primers for every surface.

Getting started

Now that you know everything about this product, it's time to create your epoxy garage floor. Simply order the required kit online and you can start as soon as possible. Do you have any questions before you get started? Take a look at our information centre. Our specialists are also happy to help. So feel free to call us on +3185 0220090.

We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.

FS101 Epoxy vloerprimer basis 2 kg

Safety equipment

Waarschuwing

Code Description
H315 Causes skin irritation.
H317 May cause an allergic skin reaction.
H319 Causes serious eye irritation.
H411 Toxic to aquatic life with long lasting effects.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P261 Avoid breathing dust/fume/gas/mist/vapours/spray.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P302+P352 IF ON SKIN: Wash with plenty of water/…
P333+P313 If skin irritation or rash occurs: Get medical advice/attention.
P501B Dispose of contents / container in accordance with local, regional or international regulations
EUH205 Contains epoxy constituents. May produce an allergic reaction.

FS111 Epoxy vloerprimer voor droge ondergrond verharder 1 kg

Safety equipment

Gevaar

Code Description
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H302+H332 Harmful if swallowed or if inhaled.
H412 Harmful to aquatic life with long lasting effects.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501B Dispose of contents / container in accordance with local, regional or international regulations

FS212 Vloercoating verharder 675 gr

Safety equipment

Gevaar

Code Description
H314 Causes severe skin burns and eye damage.
H317 May cause an allergic skin reaction.
H302+H332 Harmful if swallowed or if inhaled.
H412 Harmful to aquatic life with long lasting effects.
P101 If medical advice is needed, have product container or label at hand.
P102 Keep out of reach of children.
P260 Do not breathe dust/fume/gas/mist/vapours/spray.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower].
P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P405 Store locked up.
P501B Dispose of contents / container in accordance with local, regional or international regulations

Product Choices

RESION
269,99 269,99
Contents Price
pieces
  • Extensive assortment!
  • PayPal, Mastercard, Visa, American Express
  • Snelle betrouwbare levering in Europa (1-5 dagen)
  • Free advice from a specialist!