- Removes air bubbles easily
- Safe and easy to use
Air bubbles in your epoxy are history with this mini gas burner! The gas burner is safe to use and has an ergonomic design, making it pleasant to use. The mini torch has an adjustable flame and a long burn time, so you can use the torch 30 minutes at a stretch. Is the gas burner empty? No problem, you can easily refill it with lighter fluid.
The mini torch gas burner comes in a sturdy box with accompanying manual.
Benefits of the mini gas burner
- Safe and ergonomic design
- Adjustable flame (up to 1300°C)
- Easy to refill
- One click ignition
- Large gas capacity
How to remove air bubbles from epoxy:
Do you have problems with air bubbles in your resin artworks? With this mini gas burner you can easily remove the air bubbles. You can easily remove the air from the epoxy by stroking the surface with the mini gas burner. This can be done at an appropriate distance (approximately 20 cm) and the torch should not be pointed at the same spot for too long.
By using the gas burner too much or too close to the epoxy, you run the risk of burning the epoxy to the mould. The epoxy can also become too hot by overuse, causing it to smoke or turn yellow. So be careful!
Burning time: 30 minutes
Max. temperature: 1300°C
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
|P210||Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.|
|P377||Leaking gas fire: Do not extinguish, unless leak can be stopped safely.|
|P381||In case of leakage, eliminate all ignition sources.|
|P410+P403||Protect from sunlight. Store in a well-ventilated place.|