RESION Pre-coloured Gelcoat
- Available in all RAL colours
- Very fast delivery
- For use in moulds
Gelcoat is a polyester prepaint that protects glass fibres from moisture and provides a gloss layer. Gelcoat is used in moulds and is available by colour. It evens out relief and makes the glass fibres stick. This RESION brand gelcoat has very good resistance to water, chemicals and heat. In addition, the coating combines well with all polyester laminating resins and polyester topcoats.
Available in all RAL colours
The polyester gelcoat is available in all RAL colours. Simply choose the desired colour and we will make sure it is delivered to your home pre-coloured.
Properties
You need a hardener to use the coloured gelcoat. The table below lists the hardener required per quantity of gelcoat.
| Gelcoat | Hardener |
| 1 kg | 20 ml hardener |
| 5 kg | 100 ml hardener |
| 25 kg | 500 ml hardener |
Gelcoat always sticks to the evaporation side. If you want to avoid this, you should use the polyester topcoat. We also sell complete gelcoat repair sets for small repairs.
MEKP-Hardener: approx. 2%
Usage: approx. 400 gr/m²
Size: 1 kg, 5 kg, 25 kg
Processing time: 20 minutes (at 20 degrees)
Shelf life: 3 to 6 months Hardening time: approx. 2 hours
Contact us for more information
Polyester gelcoat by colour is available in packaging units of 1 kg, 5 kg and 25 kg. Simply order online today so you can get started with it the very next day. Do you have questions about using the gelcoat by colour or can we help you with anything else? Then take a look at our information centre where we provide answers to frequently asked questions. Our specialists will also be happy to help you. So feel free to call us at +3185 0220090.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
Polyester Gelcoat RAL 1000 groenbeige - 1 kg
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H226 | Flammable liquid and vapour. |
| H304 | May be fatal if swallowed and enters airways. |
| H315 | Causes skin irritation. |
| H317 | May cause an allergic skin reaction. |
| H319 | Causes serious eye irritation. |
| H332 | Harmful if inhaled. |
| H335 | May cause respiratory irritation. |
| H361 | Suspected of damaging fertility or the unborn child <state specific effect if known> <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>. |
| H372 | Causes damage to organs <or state all organs affected, if known> through prolonged or repeated exposure <state route of exposure if it is conclusively proven that no other routes of exposure cause the hazard>. |
| H412 | Harmful to aquatic life with long lasting effects. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P260 | Do not breathe dust/fume/gas/mist/vapours/spray. |
| P270 | Do no eat, drink or smoke when using this product. |
| P314 | Get medical advice/attention if you feel unwell. |
| P301+P310 | IF SWALLOWED: Immediately call a POISON CENTER/doctor/… |
| P405 | Store locked up. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
