Geode coasters
- 5 geode coasters
- Easy unloading
- Material: silicone
Making your own epoxy coasters in the shape of geodes? You can do so very easily with this mould set containing five geode moulds in different sizes. The moulds are made of silicone so the epoxy does not adhere to the mould. So you can easily remove the cured resin from the mould and then use this mould several times.
Suitable epoxy resin
Using suitable epoxy is important for the end result of your homemade coasters. Want to use epoxy that is highly resistant to UV radiation and very easy to process? Then choose RESION UV Resin Art Epoxy LV (low viscosity), RESION UV Resin Art Epoxy MV (medium viscosity) or MasterCast epoxy. Because these epoxy resins do not discolour under UV light, you do not need a UV stabiliser. For all epoxy resins, see the Epoxy category.
Use UltraCast epoxy resin to increase the heat resistance of coasters (up to 75°C). This way you reduce the risk of rings on your coasters!
Make unique coasters with these pigments
With epoxy pigments you can give your Resin Art coasters a unique twist. Do you opt for luxurious MetalTint or ChromaTint pigments? Or will you go for cool effects with Pinata alcohol ink or sparkling FlakeTint. View our entire pigment range to check out which pigments suit you!
Products Properties
Shape: geode
Quantity: set of 5 coasters
Material: silicone
Dimensions
- LxW: 13 cm x 11 cm
- Depth: 1 cm
The size of the moulds varies per mould. Use a total of approximately 250 grams of epoxy.
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
