Epoxy floor primer for smooth substrates
- Suitable for concrete flooring
- High yield
- Fast curing
This epoxy floor primer has been especially developed for transparent applications, on normal and smooth surfaces. Therefore this primer is suitable for levelled concrete floors, tiled floors, wall tiles, mosaic, concrete counter tops and ceramic substrates.
Instructions for use epoxy floor primer
When applying epoxy floor primer always make sure the substrate is dry and free of grease and clean it beforehand, for example with ammonia diluted with water (1:10). Let this dry thoroughly before applying the primer. After 16 to 48 hours after applying the primer, work can be continued without sanding. After 48 hours or when applying 2 layers, you should always sand the surface lightly first. After this, work can be continued with the transparent epoxy floor coating.
You can also order the primer in the colour white. White primer is mainly used to cover a light coloured epoxy floor coating better.
For a PU or an Epoxy cast floor a coloured primer is not necessarily required. The layer of these floor systems is considerably thicker and therefore provides better coverage.
Properties
| Packaging | Basis (FS101) | Hardener(FS113) |
| 0.75 kg (set for approx. 3 m2) | 0.5 kg | 0.25 kg (bottle) |
| 1.5 kg (set for approx. 6 m2) | 1 kg | 0.5 kg (bottle) |
Mixing ratio: 100:50 (2 parts by weight of resin, 1 part by weight of hardener)
Processing time: approx. 30 min. at 20-25℃
Colour: transparent or white
To process with: velvet roller (thin application)
Consumption: 150-250 gr/m2 (depending on the surface)
We have a number of recommendations for working safely with polymers. At Polyestershoppen you will not only find the polymers themselves, but you can also purchase all the protective equipment you need from us. If you have any doubts or questions, please contact our customer service. We can give you advice on how to work safely with polymers.
FS113 Epoxyprimer voor gladde ondergrond verharder 250 gr
Safety equipment
Gevaar
| Code | Description |
|---|---|
| H314 | Causes severe skin burns and eye damage. |
| H317 | May cause an allergic skin reaction. |
| H302+H332 | Harmful if swallowed or if inhaled. |
| H412 | Harmful to aquatic life with long lasting effects. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P260 | Do not breathe dust/fume/gas/mist/vapours/spray. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P303+P361+P353 | IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. |
| P305+P351+P338 | IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. |
| P405 | Store locked up. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
FS101 | RESION Epoxy vloerprimer | Basis | 500 gr
Safety equipment
Waarschuwing
| Code | Description |
|---|---|
| H315 | Causes skin irritation. |
| H317 | May cause an allergic skin reaction. |
| H319 | Causes serious eye irritation. |
| H411 | Toxic to aquatic life with long lasting effects. |
| P101 | If medical advice is needed, have product container or label at hand. |
| P102 | Keep out of reach of children. |
| P261 | Avoid breathing dust/fume/gas/mist/vapours/spray. |
| P273 | Avoid release to the environment. |
| P280 | Wear protective gloves/protective clothing/eye protection/face protection. |
| P302+P352 | IF ON SKIN: Wash with plenty of water/… |
| P333+P313 | If skin irritation or rash occurs: Get medical advice/attention. |
| P501B | Dispose of contents/container in accordance with in accordance with local regulation |
| EUH205 | Contains epoxy constituents. May produce an allergic reaction. |
